5. Troubleshooting
I
J
Push the Endorser in until it clicks, and tuck the Endorser’s power cord into the appropriate hook.
Slide the protrusion on the bottom of the cover into the output table, and then push the cover closed.
Cleaning the Endorser
If paper scraps and dust accumulate in the vicinity of the printing section of the Endorser, printing quality will be adversely affected. If the printing section becomes dirty, gently wipe the portion shown in white in the illustration below with a dry, soft cloth.
Important
❒Do not wipe any portion other than that which is shown in white above. In addi- tion, do not touch the printing section. Doing so may get your fingers dirty, and could damage the printing section.
32
