5. Troubleshooting

When Characters Printed by the Endorser are Too Light or the Original Gets Dirty

Replacing the Ink Ribbon

Caution:

When you pull out the plug from the socket, grip the plug to avoid damaging the cord and causing fire or electric shock.

Replace the ink ribbon if the Endorser’s printing becomes too light.

ATurn off scanner power, and unplug the power cable from the power outlet.

BFlip open the Endorser cover (located towards the rear of the output table), and pull the cover out.

CGrasp the green portion of the Endorser, and turn it in the direction indicated by the arrow until it clicks.

30

Page 44
Image 44
Ricoh IS450 operating instructions Replacing the Ink Ribbon