Specifications | Ricoh IS450 instruction

6. Appendices

Specifications

Scanner Electrical and Hardware Specifications

Type	Desktop flatbed scanner
Scanning methods	Fixed original scanning and moving original scanning
Scanning area	Main-direction: 298mm (11.7”) max.
	Sub-direction: 432mm (17”) max.

Resolution	Main-scanning: 400dpi
	Sub-scanning: 400dpi

Gray scale	8 bits/pixel

Scanning time	0.65 seconds (A4K/200dpi/binary)
	0.62 seconds (LTK/200dpi/binary)
Scanning speed	Simplex Model: 55ppm (A4K/200dpi/binary)
	57ppm (LTK/200dpi/binary)
	Duplex Model: 86ipm (A4K/200dpi/binary)
	88ipm (LTK/200dpi/binary)
	*ipm: images per minute
Warm-up time	Max. 15 seconds
Interface	SCSI-2 50-pin half-pitch (pin type) x 2

Power consumption	Simplex Model:
	50W maximum when in standby (options installed)
	90W maximum when operating (options installed)
	Duplex Model:
	80W maximum when in standby (options installed)
	120W maximum when operating (options installed)

Size	470mm (W) x 677mm (D) x 278mm (H)
	18.5” (W) x 26.7” (D) x 10.9” (H)
Weight	Simplex Model: Approximately 25kg (55.1lb)
	Duplex Model: Approximately 26kg (63.9lb)
	(Add 1kg (4.4lb) when the Endorser Unit Type A is installed.)

42

Image 56

Ricoh IS450 operating instructions Scanner Electrical and Hardware Specifications

Contents

Image Scanner Introduction Copyright Declaration of Conformity Examples of Indications Safety InformationSafety During Operation Safety Information Iii Important Information Important Information Important Information How to Read This Manual How to Read This ManualLimitation Reference Table of Contents General Scanning Method Manual Scanning Setting OriginalsOriginals Maintenance SpecificationsDIP Switches Functions OptionsPage Features Introduction Space-saving design Introduction Guide to the Scanner Power Connector Rotary SwitchScsi Connector DIP Switches Understanding the Indicators Description Introduction Checking the Scanner Location Preparing for InstallationSetup location Setting up the Scanner Installation space Installation environment Important Usable range Recommended range Connecting to the Host Computer What is SCSI?Setting up the Scanner Scsi Connection Require Ments for the Scanner Connecting to the Host Computer Setting the Scsi IDConnecting the Scsi Cable No Connection to Other Port Connecting the Scsi Cable Connection to Other Port Connecting the Power Cable Plug the other end of the power cable into the power outlet Turning Off the Scanner Power Turning On/Off the Scanner PowerTurning On the Scanner Power Initializing the Scanner Recommended Sizes and Weights of Originals Originals Difficult to Detect Sizes Contact glass Auto Document Feeder ADF Original Sizes and Scanning AreaOriginals Original sizes that can be detected automatically Setting Originals Setting the Original on the Contact Glass Setting the Original in the Auto Document Feeder ADF Align the originals on the ADF Simplex scanning Duplex scanning Guides Make sure the Auto Document Feeder ADF is closed Setting Originals Scanning Originals General Scanning Method Manual Scanning Scanning Originals When Scanning Does not Start Item to check Action Description of error Action Error Indicators and SolutionsTroubleshooting Procedures to Correct Errors in the ADF When an Original is Jammed in the Auto Document Feeder ADF Replacing the Ink Ribbon Do not pull on the Endorser’s cord Cleaning the Endorser Maintenance Cleaning the Scanner Cleaning the Feed Roller and Drum Appendices Maintenance Cleaning the White Roller Duplex Model Only Maintenance Moving the Scanner Disposing of the Scanner Carrying the Scanner a Short Distance Red Lamp Unit Type a OptionsImage Processing Unit Type a Endorser Unit Type a Printing Function Specifications Scanner Electrical and Hardware Specifications DIP Switches Functions Preview Scan Scanning CompositionBinary scanning Halftone scanning Binary Scanning/Threshold Standard modeDynamic threshold mode Halftone Scanning Gray Scale Scanning Area Extraction Section Area Multi-area Settings Auto Photo/Letter Resolution Brightness Contrast Gamma Correction Binary Filters Parameter DownloadNoise removal Smoothing Document Size Detection in the Auto Document Feeder ADF Document Size DetectionDocument Size Detection on the Contact Glass Erase Background When Erase Background is disabledWhen Erase Background is enabled DIP Switch 10, 27 Index Red Lamp Unit Appendices