ii

Safety Information

Warnings

Only connect the machine to the power source described on the inside front cover of this manual.

Avoid multi-wiring.

Do not damage, break or make any modifications to the power cord. Do not place heavy objects on it, pull it hard or bend it more than necessary. These actions could cause an electric shock or fire.

Do not plug or unplug the power cord with your hands wet. Otherwise, an electric shock might occur.

Make sure the wall outlet is near the machine and easily accessible so that in event of an emergency it can be unplugged easily.

Do not remove any covers or screws other than those specified in this manual. Some parts of the machine are at a high voltage and could give you an electric shock. When the machine needs to be checked, adjusted, or repaired, contact your service representatives.

Do not take apart or attempt any modifications to this machine. There is a risk of fire, electric shock, explosion or loss of sight.

If the machine looks damaged or breaks down, smoke is coming out, there is a strange smell or anything looks unusual, immediately turn off the power switch then unplug the power cord from the wall. Do not continue using the machine in this condition. Contact your service representative.

If metal, liquid, or foreign matter falls into the machine, turn off the power switch, and unplug the power cord. Contact your service representative. Do not keep using the machine with a fault or defect.

Do not put any metal objects or containers holding water(e.g. vases, flowerpots, glasses) on the machine. If the contents fall inside the machine, a fire or electric shock could occur.

Page 6
Image 6
Ricoh IS450 operating instructions Safety Information