Section Area Multi-area Settings | Ricoh IS450 guide

6. Appendices

Section Area (Multi-area Settings)

This function permits the specification of up to four rectangular areas of any size within the scanning area, each of which can be set as the scanning area. When overlapping areas are set, the area that was set last takes priority.

For example, when a single original contains both text and photos, specify rectangular areas for each, and then set binary scanning mode for the text areas and halftone scanning mode for the photographs. This function allows each area to be scanned in its respective scanning mode in one scan.

Limitation

❒During double-sided scanning, this function is valid only for the front side of the original.

Note

❒Note that scanning might not be performed in the specified manner if any of the four rectangular areas overlap. In this case, either decrease the number of rectangles, or else reduce them in size.

❒This function is valid only when the optional Image Processing Unit Type A is installed.

1.Binary scanning is set for the whole page

2.Halftone scanning is set for this area

3.Halftone scanning is set for this area

4.Halftone scanning is set for this area

Original

When this function is not used

k

Result of settings	When entire original	When entire original was
described above	was scanned through	scanned through halftone
50	binary scanning	scanning
50

Image 64

Ricoh IS450 operating instructions Section Area Multi-area Settings

Contents

Image Scanner Introduction Copyright Declaration of Conformity Safety During Operation Safety InformationExamples of Indications Safety Information Iii Important Information Important Information Important Information How to Read This Manual How to Read This ManualLimitation Reference Table of Contents Originals Setting OriginalsGeneral Scanning Method Manual Scanning Maintenance SpecificationsDIP Switches Functions OptionsPage Features Introduction Space-saving design Introduction Guide to the Scanner Power Connector Rotary SwitchScsi Connector DIP Switches Understanding the Indicators Description Introduction Setup location Preparing for InstallationChecking the Scanner Location Setting up the Scanner Installation space Installation environment Important Usable range Recommended range Connecting to the Host Computer What is SCSI?Setting up the Scanner Scsi Connection Require Ments for the Scanner Connecting the Scsi Cable No Connection to Other Port Setting the Scsi IDConnecting to the Host Computer Connecting the Scsi Cable Connection to Other Port Connecting the Power Cable Plug the other end of the power cable into the power outlet Turning On the Scanner Power Turning On/Off the Scanner PowerTurning Off the Scanner Power Initializing the Scanner Recommended Sizes and Weights of Originals Originals Difficult to Detect Sizes Originals Original sizes that can be detected automatically Original Sizes and Scanning AreaContact glass Auto Document Feeder ADF Setting Originals Setting the Original on the Contact Glass Setting the Original in the Auto Document Feeder ADF Align the originals on the ADF Simplex scanning Duplex scanning Guides Make sure the Auto Document Feeder ADF is closed Setting Originals Scanning Originals General Scanning Method Manual Scanning Scanning Originals When Scanning Does not Start Item to check Action Troubleshooting Error Indicators and SolutionsDescription of error Action Procedures to Correct Errors in the ADF When an Original is Jammed in the Auto Document Feeder ADF Replacing the Ink Ribbon Do not pull on the Endorser’s cord Cleaning the Endorser Maintenance Cleaning the Scanner Cleaning the Feed Roller and Drum Appendices Maintenance Cleaning the White Roller Duplex Model Only Maintenance Moving the Scanner Disposing of the Scanner Carrying the Scanner a Short Distance Image Processing Unit Type a OptionsRed Lamp Unit Type a Endorser Unit Type a Printing Function Specifications Scanner Electrical and Hardware Specifications DIP Switches Functions Preview Scan Scanning CompositionBinary scanning Halftone scanning Dynamic threshold mode Standard modeBinary Scanning/Threshold Halftone Scanning Gray Scale Scanning Area Extraction Section Area Multi-area Settings Auto Photo/Letter Resolution Brightness Contrast Gamma Correction Binary Filters Parameter DownloadNoise removal Smoothing Document Size Detection on the Contact Glass Document Size DetectionDocument Size Detection in the Auto Document Feeder ADF When Erase Background is enabled When Erase Background is disabledErase Background DIP Switch 10, 27 Index Red Lamp Unit Appendices