Connecting the Power Cable | Ricoh IS450 specification

Connecting the Power Cable

Connecting the Power Cable

This section explains how to connect the power cable to the scanner.

Warning

∙Only connect the machine to the power source described on the inside front cover of this manual.

∙Avoid multi-wiring.

∙Do not damage, break or make any modifications to the power cord. Do not place heavy objects on it, pull it hard or bend it more than necessary. These actions could cause an electric shock or fire.

∙Do not plug or unplug the power cord with your hands wet. Otherwise, an electric shock might occur.

Warning

∙Be sure to ground the scanner. Failure to ground the scanner could result in fire or electric shock. If there is no ground connection available, consult your dealer.

Caution

∙When you pull out the plug from the socket, grip the plug to avoid damaging the cord and causing fire or electric shock.

AConfirm that the power switch is off.

13

Image 27

Ricoh IS450 operating instructions Connecting the Power Cable

Contents

Image Scanner Introduction Copyright Declaration of Conformity Safety Information Safety During OperationExamples of Indications Safety Information Iii Important Information Important Information Important Information Reference How to Read This ManualHow to Read This Manual Limitation Table of Contents Setting Originals OriginalsGeneral Scanning Method Manual Scanning Options MaintenanceSpecifications DIP Switches FunctionsPage Introduction Features Introduction Space-saving design Guide to the Scanner DIP Switches Power ConnectorRotary Switch Scsi Connector Description Understanding the Indicators Introduction Preparing for Installation Setup locationChecking the Scanner Location Installation environment Important Setting up the Scanner Installation space Usable range Recommended range Scsi Connection Require Ments for the Scanner Connecting to the Host ComputerWhat is SCSI? Setting up the Scanner Setting the Scsi ID Connecting the Scsi Cable No Connection to Other PortConnecting to the Host Computer Connecting the Scsi Cable Connection to Other Port Connecting the Power Cable Plug the other end of the power cable into the power outlet Turning On/Off the Scanner Power Turning On the Scanner PowerTurning Off the Scanner Power Initializing the Scanner Originals Recommended Sizes and Weights of Originals Difficult to Detect Sizes Original Sizes and Scanning Area Originals Original sizes that can be detected automaticallyContact glass Auto Document Feeder ADF Setting the Original on the Contact Glass Setting Originals Align the originals on the ADF Setting the Original in the Auto Document Feeder ADF Simplex scanning Duplex scanning Guides Make sure the Auto Document Feeder ADF is closed Setting Originals General Scanning Method Scanning Originals Scanning Originals Manual Scanning Item to check Action When Scanning Does not Start Error Indicators and Solutions TroubleshootingDescription of error Action When an Original is Jammed in the Auto Document Feeder ADF Procedures to Correct Errors in the ADF Replacing the Ink Ribbon Do not pull on the Endorser’s cord Cleaning the Endorser Cleaning the Scanner Maintenance Appendices Cleaning the Feed Roller and Drum Maintenance Cleaning the White Roller Duplex Model Only Maintenance Moving the Scanner Carrying the Scanner a Short Distance Disposing of the Scanner Options Image Processing Unit Type aRed Lamp Unit Type a Endorser Unit Type a Printing Function Scanner Electrical and Hardware Specifications Specifications DIP Switches Preview Functions Halftone scanning ScanScanning Composition Binary scanning Standard mode Dynamic threshold modeBinary Scanning/Threshold Halftone Scanning Gray Scale Scanning Area Extraction Section Area Multi-area Settings Auto Photo/Letter Resolution Contrast Brightness Gamma Correction Smoothing Binary FiltersParameter Download Noise removal Document Size Detection Document Size Detection on the Contact GlassDocument Size Detection in the Auto Document Feeder ADF When Erase Background is disabled When Erase Background is enabledErase Background Index DIP Switch 10, 27 Red Lamp Unit Appendices