BT 200 manual To set your PIN To play back messages, Use the keypad to enter your security

Paragon 200 - Edition 4.3 – 26th Sept ’00

To set your PIN

To play back messages

Sel

Press buttons in the order shown

Press and release until the display

shows SECURITY CODE.

Ring your answering machine as

normal.

Press and release during the outgoing

message. The prompt says “Please enter

OK

The prompt says “Please enter your

4 digit security code” and displays the current PIN.

	your 4 digit security code”.
PIN	Use the keypad to enter your security
	PIN. Wait to hear the confirmation

ANSWER MACHINE

KEYPAD Enter the 4-digit PIN you want.

OK To confirm the PIN displayed.

Please note

When calling your Paragon 200 from another

phone, it allows two attempts to enter the correct PIN. If this is not done, you hear the message “Thank you for calling” and the machine hangs up.

To switch on your answering machine

If you have forgotten to switch on your answering machine

Ring your answering machine from another phone

After 20 rings, your Paragon 200 will automatically answer the call.

HANG UP Your answering machine is now switched on.

	beep after each digit.
	After the last digit, the prompt says
	“You have X messages” and begins to
	play them.
	You can now control your answering
	machine by pressing the appropriate
	button on the keypad:
A
BC	Play messages.
2
G
HI	Skip back to previous message.
4
J	Delete the message being played
KL
5
	(or delete all messages at the end of
	play back).
M
NO	Skip forward to the next message.
6

16