BT 200 manual Setting up, Plan the location of your Paragon, Insert back-up battery

Paragon 200 - Edition 4.3 – 26th Sept ’00

Setting up

Follow these steps to set up your Paragon 200 ready for use.

Plan the location of your

Paragon 200

Situate your Paragon 200 close enough to both the phone and mains power sockets so that the cables will reach.

Your Paragon 200 should be kept free of dust, moisture, high temperature, vibration and should not be exposed to direct sunlight. Do not stand it on carpets or other surfaces which generate fibres or place it in locations which prevent the free flow of air over its surfaces.

Warning

The apparatus is designed to be operated in a normal office or domestic environment where the relative humidity does not exceed 75%.

It should not be used in bathrooms or near water.

1Insert back-up battery

Although optional we recommend fitting an alkaline battery which will provide up to 25 hours back-up and ensure your messages are saved in the event of a mains power failure.

Ensure the Paragon 200 is disconnected from the telephone line.

To fit the battery.

1Lift the cover.

2Insert one LR61 9V battery (not supplied).

1

2

SETTING UP

Battery low warning

The display indicates when the battery power is low. If no battery is inserted, it remains on the display.

5