BT 200 manual To record your own outgoing message, To record a memo, To delete your personal OGM

Page 16

Paragon 200 - Edition 4.3 – 26th Sept ’00

To record your own outgoing message

 

Press buttons in the order shown

Sel

Press and release until the display

 

shows OGM.

OK

The prompt says “Please record your

 

message after the tone. To end recording

 

press OK.” Speak your message clearly.

 

(You can also lift your handset at this

 

point and record your message). The

Note

If you delete your own recorded outgoing

message, it will automatically be replaced by the

pre-recorded message.

To record a memo

Press buttons in the order shown

 

display counts up your recording time

 

in seconds.

OK

To stop recording. Your new OGM is

 

played back.

Note

Your Paragon 200 has a total recording

capacity of 15 minutes. Your outgoing message

is limited to a maximum of 2 minutes.

To delete your personal OGM

memo Play

memo Play

Answer on off

Del

You can use your Paragon 200 to record a memo which can be played back by another user.

Hold the button down the prompt says “Please speak after the tone”.

Speak your memo.

Release the PLAY/MEMO button to end recording. Whilst recording the display counts up the time in seconds.

The memo will automatically be played back to you. You can press ANSWER ON/OFF to cancel playback.

Press DEL during memo playback to delete the memo.

ANSWER MACHINE

Sel

memo Play

Del

Press and release until the display shows OGM.

Your current OGM is played.

To delete the message.

The pre-recorded OGM is played. “Hello, your call cannot be taken at the moment, so please leave your message after the tone.”

13

Image 16
Contents UserGuide ParagonParagon 200 Edition 4.3 26th Sept ’00 Paragon 200 Edition 4.3 26th Sept ’00 At a glance Allows you to change the display contrastDefault TB Using the telephone This guideIntroduction Unpacking your ParagonFor your records Enter your PIN hereSetting up Insert back-up batteryPlan the location of your Paragon It should not be used in bathrooms or near waterCheck Dial Mode setting default TB Connect handset cord to baseConnect the telephone line cord Plug the mains adaptor cord into the back of the telephonePlug the mains adaptor into the wall socket and switch on Fit plinth for desk mounting and track cablesSays Please enter the time using the 24 hour clock Wall-mounting your ParagonTo set the day and time Press buttons in the order shownUsing the Inductive Coupler Using the telephoneMaking and ending calls Using the one-touch buttons To adjust the earpiece volume during a call To store a one-touch number To make a one-touch callTo make a quickdial call To store a quickdial number Using the quickdial memoryTo delete/change a quickdial number Using the answering machine To switch the answering machine on, off and to Answer OnlyTo record a memo To record your own outgoing messageTo delete your personal OGM Message and Ring Indicator To playback your messagesTo privately playback your messages through the handset To delete all messagesUsing Remote Access To adjust the playback volumeTo switch on Caller Return To use Call Screening To use Caller Return AutoTo switch on your answering machine To set your PIN To play back messagesUse the keypad to enter your security PIN. Wait to hear the confirmationTo adjust the ring tone Optional SettingsRinger To adjust the display contrast To adjust the ringer volumePrompt says Please select the ringer Guarantee SafetyGeneral information Technical information Help and advice0845 330 If the power fails Wall-mounting template Index Rtte Offices worldwide
Related manuals
Manual 6 pages 4.13 Kb