BT 200 manual To use Caller Return Auto, Using Remote Access, To adjust the playback volume

Paragon 200 - Edition 4.3 – 26th Sept ’00

To adjust the playback volume

During playback:

Vol

Adjust the loudspeaker volume. The level is shown at the bottom of the display.

To use Caller Return (Auto 1471)

Caller Return automatically dials 1471 after a caller has left a message on your answering machine and records the announcement giving the telephone number (if available) and the time of the call. So even if a caller chooses not to leave a message, you may still have their telephone number recorded.

To switch on Caller Return

To use Call Screening

You can let your Paragon 200 answer a call and have the loudspeaker switched on so you can hear the caller. This gives you the option of picking up the handset and speaking to them or letting them leave a message.

While the Paragon 200 is answering a call or while idle.

Vol

Adjust the loudspeaker volume. The level is shown at the bottom of the display.

Using Remote Access

You can switch on your answering machine from another phone and, providing you are using a TouchToneTM keypad, play back your messages and memos.

ANSWER MACHINE

Sel

Press and release until the display shows 1471.

The pre-set code is 0000.

OK

Switches between ON and OFF.

OK	Prompt will confirm the setting
	displayed.

While the Caller Return setting is switched ON, the display shows 1471.

15