BT 2300 SMS manual Base Handset

Page 34

On-Air 2300 SMS user guide ~ Edition 3.1 ~ 16th August ’02 ~ 4698

Note (cont)

If you have registered your handset to more than one base you can prioritise which base you want your handset to use. For instructions on base station priority, see page 21.

To register a handset to a base station (if you have changed the System Code from 0000)

At the base:–

At the base:–

S	Press and hold down the		SKIP button
	Press and hold down the		SKIP button
kip

until the PLAY button starts to flash.

Sk	Press and hold down the		SKIP button
	Press and hold down the		SKIP button
ip

until the PLAY button starts to flash.

On the handset:–

▲Use the UP button to scroll to Base.

Press OK to confirm.

COK

The display will show Register.

▲

▼

COK

COK

On the handset:–

Use the UP or DOWN button to scroll to Base.

Press OK to confirm.

The display will show Register.

Press OK to confirm.

Press OK to confirm.

COK

Use the UP or DOWN button to scroll

▲to Automatic.

▼Press OK to confirm.

COK

The display will show Searching for base.

After a few seconds the handset will be registered and display:

▲Use the UP or DOWN button to scroll

▼to Custom.

C OK	Press OK to confirm.

▲Use the UP or DOWN button to scroll ▼ to the required base number.

C OK	Press OK to confirm.

At this stage if you require you can edit the base name.

C OK	Press OK to confirm.

Enter the System Code using the keypad.

Base 1

Handset 2

To check that the handset is registered press talk to hear a dial tone.

C OK	Press OK to confirm.

The display will now flash Searching for base.

You will then see a list of the available handset numbers.

▲Use the UP or DOWN button to scroll

▼to the number you require.

C OK	Press OK to confirm.

33

Image 34

Contents BT On-Air 2300 SMS Handset At a glanceBase Setting up Using the telephone This guideMenu Structure Intercom Directory Redial Silent mode Ans machine Menu Structure Unpacking your BT On-Air 2300 SMS Safety informationIntroduction For your recordsPlan the location Setting upConnect the power supply and switch on Rubber feetCharge the handset battery for at least 16 hours Battery performanceChanging your handset fascias Connect the telephone line cord after charging your handset0870 240 Call timer Using the telephoneMaking and ending calls Handsfree SecrecyName and number directory To edit a directory number To insert a pause when storing a number in the directoryTo dial a number from the directory To delete a directory numberInternal calls Paging handsetsCaller Display Calls list To enter the calls listRedial list All callsSilent mode Handset settingsTo adjust ringer melody and volume To switch keyguard on KeyguardTo switch keyguard off Alarm clockTo set the alarm Timer To turn the alarm offProgram buttons Base settingsTo change your System Code System CodeTo change base station priority To change base station nameTo set the date To Set timeTo record your own outgoing message OGM Answering machine modesTo set the time and date Please see To delete your outgoing message To adjust the time allowed for recording incoming messages To switch answering machine onMode Playing your messages At the baseBase speaker Answering machine operation during message playbackTo delete all messages HandsetTo use call screening To record a memo messageTo switch VIP on and off VIP featureTo set the VIP access code Remote access To change your Remote Access CodeAnswering machine control functions Using additional handsets and bases Using additional handsets and basesRegistering additional handsets Base Handset Base Handset To de-register a handset from the baseGeneral information GuaranteeTechnical information To activate Recall Switchboard compatibilityRecall To change the network connectionSwitchboard external line access code To activate and de-activate the external line access code Wall mounting 122 mmIndex VIPOn-Air 2300 SMS user guide ~ Edition 3.1 ~ 16th August ’02 ~