BT 2300 SMS manual Wall mounting, 122 mm

Page 40

On-Air 2300 SMS user guide ~ Edition 3.1 ~ 16th August ’02 ~ 4698

Wall mounting

1

1Push the base-mount forward onto the rear of the base.

2

122 mm

2Once slotted into the rear of the base, slide upwards to lock into position.

WALL PLUG SCREW

WALL

122mm

If wall mounting your BT On-Air 2300 SMS, use this guide for position.

•Make sure that you are not drilling into any hidden wiring and check that the power cable will reach from the mains socket to the charger. Switch the power adaptor off at the mains and remove the adaptor plug from its socket.

•Drill two holes 25mm deep using a 3mm drill, 122mm apart to take the wall plugs.

•Put wall plugs into the drill holes and then insert both screws. Leave 2-3mm between the head of the screw and the wall. You are now able to mount the base to the wall.

•Fit the base onto the two screws. If necessary, tighten or loosen the screws for the best fit.

•Put the handset back in the base and switch the power back on at the wall socket.

39

Image 40

Contents BT On-Air 2300 SMS Handset At a glanceBase Setting up Using the telephone This guideMenu Structure Intercom Directory Redial Silent mode Ans machine Menu Structure Safety information IntroductionUnpacking your BT On-Air 2300 SMS For your recordsSetting up Connect the power supply and switch onPlan the location Rubber feetCharge the handset battery for at least 16 hours Battery performanceChanging your handset fascias Connect the telephone line cord after charging your handset0870 240 Call timer Using the telephoneMaking and ending calls Handsfree SecrecyName and number directory To insert a pause when storing a number in the directory To dial a number from the directoryTo edit a directory number To delete a directory numberInternal calls Paging handsetsCaller Display Calls list To enter the calls listRedial list All callsSilent mode Handset settingsTo adjust ringer melody and volume To switch keyguard on KeyguardTo switch keyguard off Alarm clockTo set the alarm Timer To turn the alarm offBase settings To change your System CodeProgram buttons System CodeTo change base station priority To change base station nameTo set the date To Set timeTo record your own outgoing message OGM Answering machine modesTo set the time and date Please see To delete your outgoing message To adjust the time allowed for recording incoming messages To switch answering machine onMode Playing your messages At the baseAnswering machine operation during message playback To delete all messagesBase speaker HandsetTo use call screening To record a memo messageTo switch VIP on and off VIP featureTo set the VIP access code Remote access To change your Remote Access CodeAnswering machine control functions Using additional handsets and bases Using additional handsets and basesRegistering additional handsets Base Handset Base Handset To de-register a handset from the baseGeneral information GuaranteeTechnical information Switchboard compatibility RecallTo activate Recall To change the network connectionSwitchboard external line access code To activate and de-activate the external line access code Wall mounting 122 mmIndex VIPOn-Air 2300 SMS user guide ~ Edition 3.1 ~ 16th August ’02 ~