BT 2300 SMS manual Charge the handset battery for at least 16 hours, Battery performance

Page 9

On-Air 2300 SMS user guide ~ Edition 3.1 ~ 16th August ’02 ~ 4698

WARNING

Do not connect the telephone line cord to the phone socket until your handset is fully charged. This will prevent the risk of the phone being answered before the battery is charged. Answering the phone before the battery is fully charged may prevent it from reaching its optimum capacity.

2Charge the handset battery for at least 16 hours

Empty 1/32/3 Full

Battery low warning

If the handset battery symbol is empty and you hear warning beeps, you will need to recharge your handset before you can use it.

WARNING

Battery performance

 

Under no circumstances should non-rechargeable batteries be used. Only use the approved batteries. Using unapproved batteries will invalidate your guarantee and may damage the telephone.

Fully discharging the batteries at least once a week will help them to last as long as possible. However, the charge capacity of rechargeable batteries will reduce with time as they wear out, so reducing the talk/standby time of the handset. Eventually they will need to be replaced. New batteries can be obtained from any BT Shop or from the helpline on 0870 240 4682.

When the battery has been charged for at least 16 hours the display will show the symbol; you can then connect the telephone line cord to the base.

Your handset is supplied with NiMH batteries. These need to be initially charged continuously for 16 hours to reach full charge.

Note that the battery charge icon does not indicate the correct level when the batteries are first installed. The batteries must first be fully charged.

Helpline

If you are experiencing difficulty, please call the BT On-Air Helpline on 0870 240 4682.

8

Page 8 Page 10
Image 9
Page 8 Page 10
Contents BT On-Air 2300 SMS At a glance HandsetBase This guide Setting up Using the telephoneMenu Structure Intercom Directory Redial Silent mode Ans machine Menu Structure Introduction Safety informationUnpacking your BT On-Air 2300 SMS For your recordsConnect the power supply and switch on Setting upPlan the location Rubber feetBattery performance Charge the handset battery for at least 16 hoursConnect the telephone line cord after charging your handset Changing your handset fascias0870 240 Using the telephone Call timerMaking and ending calls Secrecy HandsfreeName and number directory To dial a number from the directory To insert a pause when storing a number in the directoryTo edit a directory number To delete a directory numberPaging handsets Internal callsCaller Display To enter the calls list Calls listAll calls Redial listHandset settings Silent modeTo adjust ringer melody and volume Keyguard To switch keyguard onAlarm clock To switch keyguard offTo set the alarm To turn the alarm off TimerTo change your System Code Base settingsProgram buttons System CodeTo change base station name To change base station priorityTo Set time To set the dateAnswering machine modes To record your own outgoing message OGMTo set the time and date Please see To delete your outgoing message To switch answering machine on To adjust the time allowed for recording incoming messagesMode At the base Playing your messagesTo delete all messages Answering machine operation during message playbackBase speaker HandsetTo record a memo message To use call screeningVIP feature To switch VIP on and offTo set the VIP access code To change your Remote Access Code Remote accessAnswering machine control functions Using additional handsets and bases Using additional handsets and basesRegistering additional handsets Base Handset To de-register a handset from the base Base HandsetGuarantee General informationTechnical information Recall Switchboard compatibilityTo activate Recall To change the network connectionSwitchboard external line access code To activate and de-activate the external line access code 122 mm Wall mountingVIP IndexOn-Air 2300 SMS user guide ~ Edition 3.1 ~ 16th August ’02 ~
Top Page Image Contents