Memorex MPH7895 manual Mounting Position, Code Function, Desktop USE, Wall USE

16.MEMO LED Indicator: Lights up to indicate the presence of Memo message and blinks if there are new Memo message(s).

17.MSG LED Indicator: Lights up to indicate the presence of Incoming Message (ICM) and Two-Way Recordings. Blinks if there are new Incoming Message(s) (ICM) or Two- Way Recording(s).

18.CHG (Charge) / IN USE LED Indicator: Lights up steadily when the phone is being used and when the handset is being charged on the base .

19.Digital LED Display: A two-digit LED display to indicate the number of Incoming Message(s) and Two-Way Recording(s). Also displays the system status and the cur- rent channel number while in TALK mode.

Code	Function
00-59	Message / Timer count / Channel No.
--	Answering OFF
Ir	Memo Recording
2r	Two-Way Recording
An	Answering Mode
Rc	Remote Control
FU	Memory Full
ER	Erasing Message
OP	OGM Playback
Or	OGM Recording

20.Retainer Tab: Allows the handset to hang on the base unit at wall mount position.

MOUNTING POSITION

DESKTOP USE:

Connect the telephone line cord to the TEL LINE jack on the rear of the base unit and connect the opposite end to the telephone modular jack.

WALL USE:	(Figure 4)
A. WITH A STANDARD MODULAR WALL JACK

1.Install the wall mount bracket at the position as shown in Figure 5.

Telephone Modular

Base Unit (Side View)

Wall Jack

Wall Mounting	Studs
Slots

Wall Mount

Bracket

(Figure 5)

2.Connect the short telephone line cord to the TEL Line jack on rear of the base.

3.Connect the opposite end of the telephone line cord to the modular wall jack.

4.Align the wall mounting slots with the studs located on the modular wall plate and slide

the base down to lock in place.

NOTE: If you do not have a standard modular wall jack, find a qualified technician to mount one on the wall.

10

	Page 11	7/5/01, 4:07 PM
MPH7895/04281A(English).put			Adobe PageMaker 6.5C/PPC