LCD DISPLAY SYMBOLS AND MESSAGE
Different messages are displayed on the LCD display to indicate the status of the Caller ID.
Screen Shown
ALL: 10 NEW: 05
DELETED!
EMPTY
DATA ERROR
Meaning
ALL CALLS and NEW CALLS
This message lets you know how many call records and new call records you have.
DELETED!
This confirms that the call record or records were deleted.
EMPTY
When creating speed dialing entries, this message indicates an available memory location.
DATA ERROR
The message sent is incomplete. This message usually indicates temporary interference or a poor signal from the phone company. There no problem on the phone.
LONG DISTANCE
NO CALLS
11:10 AM 10/10 CALL#03
11:10AM 10/10 CALL# 03
| |
JOHN SMITH | $ |
11:10 AM 10/10 CALL #03
_ _ _ _ _ _ _ _ _ _
BLOCKED CALL
11:10 AM 10/10 CALL# 03
_ _ _ _ _ _ _ _ _ _ _
OUT OF AREA
11:10 AM 10/10 CALL# 03
NO NAME
11:10AM 10/10 CALL# 03
JOHN SMITH
TALK [ M ]
LONG DISTANCE
The message sent is a long distance call.
NO CALLS
There are no call records stored in memory.
NUMBER ONLY
Either name service is not available in your area or you are sub- scribed to a
TOLL MARK
The blinking $ indicates a Toll Mark. (Qualifier L)
BLOCKED CALL
The caller has purposely chosen to block his / her name and phone numbers from appearing on the Caller ID of the receiving party.
OUT OF AREA
The Caller Number might not be available from the caller's area.
NO NAME
The Caller Name might not be available from the caller's area.
REPEAT CALL
This blinking * indicates that the Call record information comes multiple.
TALK
The handset is ON and ready for you to dial. [ M ] means that the volume level is medium.
26
| Page 27 | 7/5/01, 4:08 PM |
|
|
|
MPH7895/04281A(English).put | Adobe PageMaker 6.5C/PPC |
| |||
|
|
|
|
|
|