Memorex MPH7895 manual Handset Battery Installation, Initial Setup

Page 13

(Figure 11)

9VAC Adapter

AC Plug

Telephone

Modular Jack

AC Outlet

Line Cord

9VAC Adapter Jack

(Figure 9)

HANDSET BATTERY INSTALLATION

CAUTION:

Use only the Nickel Cadmium (Ni-Cd) battery type included with this unit. Use of other battery types may cause injuries or damage.

1.Remove the battery compartment cover of the handset. Connect the rechargeable Ni-Cd battery as shown in Figure 10.

	Handset	Insert the End of the
	Battery
		Battery Pack Wire
	Compartment

	RED Wire	BLACK Wire

(Figure 10)

2.Insert the Ni-Cd battery into the battery compartment of the handset.

3.Slide the battery compartment cover firmly in its closed position.

INITIAL SETUP

Before you can use your cordless telephone, the handset must be charged for at least 20 hours. See charging instruction on MAXIMIZING BATTERY LIFE section of this manual.

SETTING THE DAY AND TIME OF THE BASE UNIT

NOTE: The time set is used for time stamping the recorded message(s).

1.After 20 hours, lift the handset from the base unit.

2.Press the REMOTE button on the handset. The unit will prompt "You have no new message. For help, press

9." followed by a long beep.

3.Press 2. The unit will prompt "Time is off. Enter new day."

4.After hearing a long beep, enter the new day (Sunday = 1, Monday = 2, Tuesday = 3, etc.). The unit will then prompt "Enter new time."

5.After hearing a long beep, enter the new hour (01-12).

6.After two beeps, enter the new minute (00-59).

12

	Page 13	7/5/01, 4:07 PM
MPH7895/04281A(English).put	Page 13	7/5/01, 4:07 PM	Adobe PageMaker 6.5C/PPC

Image 13

Contents MPH7895 Important Service Information Carton Contents Important Safety Instructions Installation Precautions Battery Safety InstructionsFCC Notice Table of Contents Controls Location and Function DescriptionHandset Controls Cordless Telephone Handset Controls Answering System Base Unit Controls Code Function Mounting PositionDesktop USE Wall USEBase Unit Power Connection Connecting the HeadsetBelt Clip Instruction Wall Mounting No Standard Wall JackInitial Setup Handset Battery InstallationSetting the DAY and Time of the Base Unit If the Handset is on the Base Unit Telephone OperationIf the Handset is OUT of the Base Unit When the Handset is OFF the Base Unit and in Standby ModeStoring Telephone Numbers Into Memory Dialing Directory Storing Telephone Numbers Into the Speed Dialing ListDeleting Single Memory Location Deleting Stored Telephone NumbersDeleting ALL Memory Location Dialing from the Memory Dialing DirectoryManual Channel Scan Auto Channel ScanTo Turn Answer Mode on To Turn Answer Mode OFFAnswering Machine Operation Skipping Messages Playing MessagesPrevious Messages Stop Message PlaybackErasing ALL Memo Messages Erasing ALL ICM and TWO-WAY RecordingsErasing OGM From the Extension PhoneRemote Operation Using the HandsetCalling the Unit from a Tone Phone Voice Help MenuSetting the DAY and Time Changing the PasswordSetting Answer Mode to on Setting Answer Mode to OFFIntroduction to Caller ID and Call Waiting ID Caller ID OperationQuestions Answers Receiving NEW CallDeleting ALL Call Records Deleting Single Call RecordCallback Option HOW to Change the Language Summary of Function ModeHOW to SET Cidcw on / OFF HOW to SET User and Neighboring Area CodeHOW to SET Time HOW to SET Ringer on / OFFHOW to Adjust the Contrast of LCD Display Deleted Empty Data Error LCD Display Symbols and MessageLong Distance No Calls John SmithMaintenance Maximizing Battery LifeImproving Cordless Reception Symptoms Possible Solution / Cause TroubleshootingPhone answering device TAD connected with the unit Technical Information Adapter Use only with Class 2 Power Source 9VAC 500 mADistributed Exclusively by Memorex MPH7895 / 04281A-1