Memorex MPH7895 manual HOW to SET Ringer on / OFF, HOW to SET Time

Page 26
12:20 AM 10/20
TIME SET
RINGER ON

1.Press SCAN/PRG button.

2.

Press 4 button, or press(+) button four times. The Callback

10

 

Number is displayed.

 

 

CALLBACK NUMBER

3.

Press or

button to change the Callback Number. The

 

 

 

Callback number scrolls as 10

07

10.

 

4.Press SCAN / PRG button to save and exit.

F. HOW TO SET RINGER ON / OFF

1. In standby mode, press SCAN / PRG button.

2.Press 5 button, or press (-) button three times. The current mode is displayed.

3.

Press or button to change mode.

RINGER OFF

4.

Press SCAN / PRG button to save and exit.

G.HOW TO SET TIME

NOTE: The time set is for the LCD Display time. If CALLER ID signal comes in, the time will adjust automatically.

1. In standby mode, press SCAN / PRG button.

2. Press 6 button, or press (-) button two times. The current time is displayed.

3.Enter 2 digits hour. The position to edit is blinking.

Use button to move the cursor to the left.

4.Enter 2 digits minute.

5.Press 1 for AM and 2 for PM.

6.Enter 2 digits month.

7.Enter 2 digits day.

8.Press SCAN / PRG button to save and exit.

H. HOW TO ADJUST THE CONTRAST OF LCD DISPLAY

1.In standby mode, press SCAN / PRG button.

2.Press 7 button, or press (-) button once. The current contrast is displayed.

3.

Press or button to change the contrast.

 

02

 

The contrast scrolls as 01

02 03 (Three steps).

 

CONTRAST

4.

Press SCAN / PRG button to save and exit.

 

NEW CALL / MESSAGE INDICATOR

On the base unit, NEW CALL LED indicator will flash every 1second when new call comes in. NEW CALL LED indicator will flash every 2 second when voice mail message comes in. On the handset, NEW CALL LED indicator will flash every 2 seconds.

TALKING TIME AND CHANNEL DISPLAY

In talk mode, the LCD Display shows the talking time. The LCD Display as shown means 1 hour and 12 minutes and 10 seconds. The using channel is 32.

1:12 10 32

TALK

CALL WAITING ID OPERATION

Call Waiting ID lets you know who is on call waiting while you are still using the telephone. Before, only a tone alerts you if you have a call waiting. Now, the unit can also show the Caller Identification on Call Waiting (CIDCW) information using the LCD Display.

NOTE: During conversation and the Call Waiting signal comes in, you will hear the data signal. Before you use these features on your unit telephone, you must first subscribe to the services through your local telephone company.

When the Call Waiting signal is heard on the receiver, the LCD Display will show the name and number just like regular Caller ID. If you wish to speak to this person, press the FLASH button.

The Call Waiting ID Records are stored, reviewed, redialed and edited the same as regular Caller ID Records. Please refer to the CALLER ID OPERATION section for more details.

25

 

Page 26

7/5/01, 4:08 PM

 

 

 

MPH7895/04281A(English).put

Adobe PageMaker 6.5C/PPC

 

 

 

 

 

 

 

Page 25 Page 27
Image 26
Page 25 Page 27
Contents MPH7895 Important Service Information Carton Contents Important Safety Instructions Battery Safety Instructions Installation PrecautionsFCC Notice Table of Contents Handset Controls Cordless Telephone DescriptionControls Location and Function Handset Controls Answering System Base Unit Controls Desktop USE Mounting PositionCode Function Wall USEBelt Clip Instruction Connecting the HeadsetBase Unit Power Connection Wall Mounting No Standard Wall JackSetting the DAY and Time of the Base Unit Handset Battery InstallationInitial Setup Telephone Operation If the Handset is on the Base UnitStoring Telephone Numbers Into Memory Dialing Directory When the Handset is OFF the Base Unit and in Standby ModeIf the Handset is OUT of the Base Unit Storing Telephone Numbers Into the Speed Dialing ListDeleting ALL Memory Location Deleting Stored Telephone NumbersDeleting Single Memory Location Dialing from the Memory Dialing DirectoryAuto Channel Scan Manual Channel ScanAnswering Machine Operation To Turn Answer Mode OFFTo Turn Answer Mode on Previous Messages Playing MessagesSkipping Messages Stop Message PlaybackErasing OGM Erasing ALL ICM and TWO-WAY RecordingsErasing ALL Memo Messages From the Extension PhoneCalling the Unit from a Tone Phone Using the HandsetRemote Operation Voice Help MenuSetting Answer Mode to on Changing the PasswordSetting the DAY and Time Setting Answer Mode to OFFQuestions Answers Caller ID OperationIntroduction to Caller ID and Call Waiting ID Receiving NEW CallCallback Option Deleting Single Call RecordDeleting ALL Call Records HOW to SET Cidcw on / OFF Summary of Function ModeHOW to Change the Language HOW to SET User and Neighboring Area CodeHOW to Adjust the Contrast of LCD Display HOW to SET Ringer on / OFFHOW to SET Time Long Distance No Calls LCD Display Symbols and MessageDeleted Empty Data Error John SmithImproving Cordless Reception Maximizing Battery LifeMaintenance Troubleshooting Symptoms Possible Solution / CausePhone answering device TAD connected with the unit Adapter Use only with Class 2 Power Source 9VAC 500 mA Technical InformationDistributed Exclusively by Memorex MPH7895 / 04281A-1
Top Page Image Contents