HL_B2800_scan.book Page 49 Friday, August 29, 2003 1:28 PM
Topcom Butler 2800
6.1 NEW CALLS
When you’ve received a new unanswered call, the CLIP symbol 
will blink on the display.
6.2 CONSULTING THE CALL LIST
•Press the Call Log button 
. The last received call is shown on the display. If the list is empty, ‘NO CLIP’ is shown on the display.
•The following will be shown on the display:
Progress number |
|
|
|
|
|
| Time (24h format) * | ||||||
|
|
|
|
|
| Date |
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
• After 5 seconds, the telephone number will be shown.You can skip the date/time by pressing the 
button.
•Use the left scroll key 
to scroll to the previous call. Use the 
button to show the next call.
•You can leave the Call list by pressing the 
button.
*ONLY WHEN THE NETWORK SENDS THE TIME/DATE TOGETHER WITH THE TELEPHONE NUMBER!!! On some networks with caller ID, time and date will not be displayed
6.3 CALLING A NUMBER FROM THE CALL LIST
•Scroll through the Call list until the desired number is shown on the display.
•Press the Line button 
. The number will be dialled automatically.
6.4 ERASING A NUMBER FROM THE CALL LIST
•Scroll through the Call list until the desired number is shown on the display.
•Press and hold the Mute button 
for 3 sec. to erase the number.
6.5 STORE A NUMBER FROM THE CALL LOG INTO THE MEMORY
•Scroll through the Call list until the desired number is shown on the display.
•Press and hold the Memory button 
for 3 sec.
•Enter the memory location
•Enter the Memory button 
again to confirm and to go back to standby
7. REGISTER/DE-REGISTER A HANDSET
7.1 REGISTER TO A TOPCOM B2800/2820 BASE
You can subscribe 5 handsets to one base unit. By default, each handset is subscribed as handset 1 on the base unit upon delivery (base unit 1).
!!! You only need to subscribe the handset if: !!!
•The handset subscription has been removed from the base unit (e.g. for reinitialisation)
•You want to subscribe a different handset to this base unit.
The underlined procedure is only applicable to a Topcom Butler 29xx, 2800, 2820 handset and base unit!! Keep the Paging key on the base unit pressed for 10 seconds until the Line/Charge indicator
on the base unit begins to blink rapidly. The Line/Charge indicator will blink rapidly
for one minute. During this minute, the base unit is in register mode and you must do the following to subscribe the handset:
Topcom Butler 2800 | 49 |