HL_B2800_scan.book Page 47 Friday, August 29, 2003 1:28 PM
Topcom Butler 2800
5.2 INCOMING CALLS
•When a call comes in, the handset will start to ring. The 
LED on the base will blink.
•Press the Line button 
to answer the incoming call.
5.3 ACTIVATE/DEACTIVATE HANDS FREE FUNCTION
This function allows you to communicate without having to pick up the handset. When you are on the phone, press the Hands free key 
to activate the hands free function.
Press the same button 
to deactivate the hands free function.
Note : When you are calling in hands free mode and you want to change the volume, press the Volume button .
Attention !! When you use the hands free function for a long time, the batteries will be empty more quickly !
5.4 PROGRAMMING MEMORY NUMBERS
You can program 10 indirect numbers (of max. 25 digits) in the phone’s memory.
•Press and hold the Memory button 
until the 
•Enter the telephone number you whish to store.
•Press the Memory button 
again to confirm.
•Enter the memory location
•You will hear a confirmation tone and the 
Remarks :
If you wish to insert a pause, press the Redial/Pause button 
/P on the location where you want a pause of 3 sec.
5.5 CALLING A MEMORY NUMBER
•Press the Memory button 
, followed by the number of the memory location
•Press the Line button 
. The memory number will be dialled automatically.
•Press the Line button 
when you want to terminate the call.
5.6 MUTE FUNCTION
It is possible to deactivate the microphone during a conversation. Now you can speak openly without being heard by your correspondent.
•Press the Mute button 
during a conversation. The microphone will be deactivated. The MUTE symbol 
. appears on the display.
•Press the Mute button 
again when you want to continue the conversation.
5.7 SETTING THE VOLUME
During a conversation you can set the volume by pressing the Volume button 
. You can set the volume alternatively in Hi, Medium and Low.
Note: The hands free receiver volume is also adjustable as above described!
5.8 PAGING
When you press the Paging button 
on the base unit, the handset emits a ringing signal for 20 seconds. This signal helps you find a lost handset. Press any key to stop the ringing on a handset.
5.9 OUT OF RANGE WARNING
When the handset is out of the working range of the base unit during a conversation, the unit will emit a warning signal to warn the user that he has to move closer towards the base unit.
ENGLISH
Topcom Butler 2800 | 47 |