Telular SX5T CDMA2000, SX5T-505C, SX5T-535C, SX5T-500C Direct Connection Phone, Fax and Data

Direct Connection: Phone, Fax and Data

1.Connect a phone to either of your SX5T’s phone (RJ11) jacks using a standard telephone cord - see Figure 11 on page 6.

2.If desired, connect your SX5T’s other phone (RJ11) jack to a second telephone or a fax machine using a standard telephone cord - see Figure 11 on page 6.

3.If desired, connect a computer to the SX5T. You may either:

·Use a Telular USB cable (part #1L01A043 or 81025901) to connect the computer’s USB port to the SX5T’s data port;

·Use a Telular serial cable (part #1L01A042 or 81025801) to connect the computer’s serial port to the SX5T’s data port;

·Or use a standard telephone cord to connect the computer’s modem out port to either of the SX5T’s phone (RJ11) jacks.

Contact your service provider to determine what wireless data transfer services are available. For more information on data connections, see “Windows XP/Windows 2000 Setup for Data & PC Fax” on page 18 or “Windows 98 Setup for Data & PC Fax” on page 24.

Connection via Wall Jacks

If you do not have local phone service, you may use your SX5T to provide a connection to your wireless service for devices that are plugged into your wall jacks.

1.Connect either of your SX5T’s phone (RJ11) jacks to any wall jack using a standard telephone cord - see Figure 11 on page 6.

Important:

DO NOT CONNECT YOUR SX5T TO A WALL JACK IF YOU HAVE OUTSIDE SERVICE (I.E., A DIAL TONE) AT YOUR WALL JACK. Your SX5T will not function properly and may become damaged if outside phone service has not been disconnected.

2.If desired, connect your SX5T’s other phone (RJ11) jack to a telephone or fax machine using a standard telephone cord - see Figure 11 on page 6.

3.Connect additional phones, a fax machine and/or a computer modem to any available wall jacks. Contact your service provider to determine what wireless data transfer services are available.

Phonecell® SX5T CDMA2000 7 User Manual