Telular SX5T CDMA2000, SX5T-505C, SX5T-535C, SX5T-500C, CDMA SX5T-500C Sending/Receiving a PC Fax

Page 32

Sending/Receiving a PC Fax

APC with a serial, USB, or phone (RJ11) connection to the SX5T can send and receive faxes using the SX5T. Your account with your service provider must support circuit switched data transfer for the SX5T’s PC fax function to work.

Set Your Computer’s Port and Modem Speeds for PC Fax

To send or receive faxes, you need to set the port and modem speeds your computer uses for the SX5T to 19200 bps. See Windows XP/2000 Setup (page 18) or Windows 98 Setup (page 24) for details.

Choose Fax Mode

1.

To receive one fax, enter Fax Next Call mode. Press

#

*

1

# .

 

 

Your SX5T will treat the next incoming call as a fax, then return to normal operation.

 

If you are using an RJ11 port to receive the fax, you may skip the remaining steps.

 

2.

To receive faxes indefinitely, enter FaxAlways mode. Press

#

*

5

# .

 

(Your SX5T will treat all incoming calls as faxes. To resume receiving voice calls, you must

 

switch back to Voice mode: Press #

*

7

# . If you wish to make a single voice

 

call while remaining in Fax Always mode, press

#

*

4

#

.)

 

If you are using an RJ11 port to receive the fax, you may skip the remaining steps.

3.To send a PC fax, set the Fax Port and Baud Rate, then use your computer’s fax software to dial the receiving fax machine’s number. Whenever your software asks you what modem to use, select the Standard 19200 Modem.

Choose the SX5T’s Fax Port

1.

Enter Configuration Mode – Press #

*

0

*

2.

Select Data Port – Press

#

*

6

7

*

 

– OR –

 

 

 

 

 

 

Select RJ11 Port – Press

#

*

6

7

*

3.If you selected Data Port, select which Data port to use.

Select Serial by pressing #

*

1

3

5

– OR –

<lock code> # .

0

# .

 

1

# .

 

*

0

# .

Select USB by pressing #

*

1

3

5

*

1

#

(Windows XP/2000 only).

 

 

 

 

 

 

 

Set the SX5T’s Baud Rate for PC Fax

1.

Enter Configuration Mode – Press

#

2.

Select Baud Speed 19200 – Press

#

*

*

0

*

<lock code>

 

# .

1

3

6

*

2

# .

Note:

If you take the phone off-hook while sending or receiving a PC fax via serial or USB cable, you will hear a busy tone; the fax data transmission or reception will not be disrupted.

If you take the phone off-hook while sending or receiving a PC fax using an RJ11 phone jack connection, the fax data transmission/reception may be disrupted.

Phonecell® SX5T CDMA2000

28

User Manual

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Phonecell SX5T CDMA2000 Contents Terms and Conditions for USE of Phonecell Products Product Telular CorporationTechnical Support Corporate HeadquartersTable of Contents Setup Ruim Card Installation Ruim Model OnlyHint Connecting an SX5T Model With a Power SupplyTo connect an SX5T model with a Power Supply Emergency Batteries To install emergency batteriesBattery Operation Connecting an SX5T Model With a BBU Backup Battery Unit To connect an SX5T model with a BBUSX5T Location and Installation Wall MountingConnectors GPS Antenna Mounting optional on SX5T-505C/-535C onlyDirect Connection Phone, Fax and Data Connection via Wall JacksLED Status Indicators Signal Strength LEDsGetting to Know Your SX5T LED ColorCallActivity Indicator LED Color Description Important Dial TonesUsing the SX5T Using In-Call FeaturesMaking Calls Receiving CallsAccessing Your Voicemail Using Call ForwardingMaking a Three-Way Call Press #Adjusting Your Phone’s Settings Volume LevelEntering Configuration Mode Changing the Lock CodeAuto-Send Delay Frequently Dialed Numbers Zero Delay DialingAudio Line Level Call BarringIndex * number # Where the options are as follows From Configuration Mode, press #Call Restrict SX5T-500C only Dial Tone After Remote Disconnect DtardYou would press # # from Configuration mode HotlineOne-Minute Alert TTY UseRestore User Defaults From Configuration Mode, press # Or 1 # , whereVoicemail Number One-Touch Voicemail RetrievalUsing a Fax Machine With Your SX5T Using Additional Hardware DevicesUsing an External Answering Machine Windows XP/Windows 2000 Setup for Data & PC Fax Press # Lock codeClick on Add… Phonecell SX5T CDMA2000 Select the 19200 bps Modem and click on Properties Control Panel System Hardware Device Manager Ports tab Phonecell SX5T CDMA2000 Windows 98 Setup for Data & PC Fax Select Standard 19200 bps Modem and click on Properties Phonecell SX5T CDMA2000 Phonecell SX5T CDMA2000 Choose Fax Mode Sending/Receiving a PC FaxSet Your Computer’s Port and Modem Speeds for PC Fax Choose the SX5T’s Fax PortSending/Receiving 1X Data Set Your Computer’s Port and Modem Speeds for 1X DataChoose the SX5T’s Data Port To Send or Receive 1X DataSending/Receiving Circuit Switched Data Choose Data ModeSet the SX5T’s Baud Rate for Circuit Switched Data Back to Voice mode Press #Advanced Programming Settings Entering Configuration Mode Advanced SettingsOn-Hook Idle Voltage Level Line ReversalRing Frequency Audio Input ImpedanceDisconnect Pulse Dial Tone Frequency SX5T-500C onlyDisconnect Tone Caller ID Display Setting SX5T-500CLine Alert Cadence Metering Pulse High Gain/Low Gain Local Metering Pulse Override/Polarity Reversal SX5T-500CSX5T Troubleshooting No PowerUnable to Receive Calls Unable to Make CallsSafety Information Conformance StatementsDriving Exposure to Electronic DevicesAircraft ChildrenPatents TrademarksPhonecell SX5T CDMA2000 Telular Corporation, all rights reserved

CDMA SX5T-500C, SX5T CDMA2000, SX5T-505C, SX5T-535C, SX5T-500C, SX5T CDMA specifications

Telular's SX5T CDMA device line represents a significant advancement in wireless communications technology, primarily designed for use in Automatic Meter Reading (AMR), asset tracking, and telemetry applications. The SX5T series includes several models, each with unique characteristics that cater to varying customer needs within the CDMA2000 framework.

One of the standout models, the SX5T CDMA, leverages CDMA2000 technology for robust and reliable wireless connectivity. This technology offers greater capacity and improved voice quality compared to earlier generation systems. The SX5T CDMA is particularly noted for its flexibility in deployment, making it an ideal choice for industries requiring seamless communication solutions.

Another variant, the SX5T-505C, builds upon the solid foundation of the SX5T CDMA, incorporating enhanced features for more demanding applications. This model includes advanced remote management capabilities, allowing users to monitor and configure devices remotely, which can lead to significant cost savings and operational efficiencies.

The SX5T-535C model is designed with increased durability in mind, making it suitable for harsh environmental conditions. It boasts high-quality build materials and design, ensuring longevity and dependable performance even in the most challenging scenarios.

For a more budget-conscious option, the SX5T-500C provides essential functionality at a competitive price point. This model delivers reliable performance for basic telemetry applications, making it an optimal choice for smaller businesses or projects with tighter budgets.

All models within the SX5T series operate on the CDMA SX5T-500C standard, offering high-speed data transmission, which is crucial for applications that require real-time information transfer. The devices support seamless integration with existing infrastructure, ensuring that they can be easily incorporated into various communication systems.

Features common across the SX5T series include low power consumption, comprehensive security protocols, and extensive customization options, allowing users to adapt the devices for specific application requirements. These attributes, combined with Telular's commitment to innovation, position the SX5T CDMA product line as a leading choice for businesses looking to enhance their telemetry solutions and streamline operations in an ever-evolving technological landscape.
Top Page Image Contents