Telular SX5T CDMA2000, SX5T-505C, SX5T-535C, SX5T-500C Using the SX5T, Making Calls, Ending Calls

Page 14

Using the SX5T

Once you have installed and activated your SX5T, you’ll be ready to make and receive calls, set up voicemail, and send and receive faxes. This section explains how to use the features of the SX5T for all your communications.

Making Calls

To make a call:

1.Pick up the telephone handset. (The phone is now “off-hook.”)

2.Listen for a dial tone. (If you hear a No Service tone [fast beeping], hang up and try again. If the No Service tone continues, contact your service provider to verify that cellular service is available.)

3.Dial a phone number. (When you have finished dialing, the call will be sent automatically.)

Tip:

Pressing the Flash key or pressing and releasing the switch-hook after dialing a number will send the call immediately.

Receiving Calls

• When the telephone rings, pick up the handset and begin talking.

Ending Calls

•When you are finished with a call, hang up the phone by placing the handset back on the telephone cradle or by pressing the Off or End button.

Using In-Call Features

To place a call on hold:

•During a call, press the Flash key on your handset (if your phone doesn’t have a Flash key, press and release the switch-hook).

·If you hang up your phone when a call is on hold, the call will be disconnected.

To retrieve a call on hold:

• Press the Flash key on your phone (or press and release the switch-hook).

To answer a call waiting call:

•When you’re on an active call and a new incoming call arrives, you will hear a short tone on your phone. To place the current call on hold and answer the incoming call, press the Flash key on your phone (or press and release the switch-hook). (To switch between calls, simply repeat the process.)

To answer a call when you are dialing or with the phone off the hook:

•If a call comes in while you are dialing or when you have the phone off the hook, you will hear a call waiting tone on your phone. To answer the incoming call, press the Flash key on your phone (or press and release the switch-hook).

Note:

Call Hold and Call Waiting are not available with all service providers. These services may not be available if you are using your SX5T in a roaming area. To determine these services’ availability in your area, contact your service provider.

Phonecell® SX5T CDMA2000

10

User Manual

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Phonecell SX5T CDMA2000 Contents Technical Support Terms and Conditions for USE of Phonecell Products ProductTelular Corporation Corporate HeadquartersTable of Contents Setup Ruim Card Installation Ruim Model OnlyHint Connecting an SX5T Model With a Power SupplyTo connect an SX5T model with a Power Supply Emergency Batteries To install emergency batteriesBattery Operation Connecting an SX5T Model With a BBU Backup Battery Unit To connect an SX5T model with a BBUSX5T Location and Installation Wall MountingConnectors GPS Antenna Mounting optional on SX5T-505C/-535C onlyDirect Connection Phone, Fax and Data Connection via Wall JacksGetting to Know Your SX5T LED Status IndicatorsSignal Strength LEDs LED ColorCallActivity Indicator LED Color Description Important Dial TonesMaking Calls Using the SX5TUsing In-Call Features Receiving CallsMaking a Three-Way Call Accessing Your VoicemailUsing Call Forwarding Press #Entering Configuration Mode Adjusting Your Phone’s SettingsVolume Level Changing the Lock CodeAudio Line Level Auto-Send DelayFrequently Dialed Numbers Zero Delay Dialing Call BarringCall Restrict SX5T-500C only Index * number # Where the options are as followsFrom Configuration Mode, press # Dial Tone After Remote Disconnect DtardOne-Minute Alert You would press # # from Configuration modeHotline TTY UseVoicemail Number Restore User DefaultsFrom Configuration Mode, press # Or 1 # , where One-Touch Voicemail RetrievalUsing a Fax Machine With Your SX5T Using Additional Hardware DevicesUsing an External Answering Machine Windows XP/Windows 2000 Setup for Data & PC Fax Press # Lock codeClick on Add… Phonecell SX5T CDMA2000 Select the 19200 bps Modem and click on Properties Control Panel System Hardware Device Manager Ports tab Phonecell SX5T CDMA2000 Windows 98 Setup for Data & PC Fax Select Standard 19200 bps Modem and click on Properties Phonecell SX5T CDMA2000 Phonecell SX5T CDMA2000 Set Your Computer’s Port and Modem Speeds for PC Fax Choose Fax ModeSending/Receiving a PC Fax Choose the SX5T’s Fax PortChoose the SX5T’s Data Port Sending/Receiving 1X DataSet Your Computer’s Port and Modem Speeds for 1X Data To Send or Receive 1X DataSet the SX5T’s Baud Rate for Circuit Switched Data Sending/Receiving Circuit Switched DataChoose Data Mode Back to Voice mode Press #On-Hook Idle Voltage Level Advanced Programming SettingsEntering Configuration Mode Advanced Settings Line ReversalDisconnect Pulse Ring FrequencyAudio Input Impedance Dial Tone Frequency SX5T-500C onlyDisconnect Tone Caller ID Display Setting SX5T-500CLine Alert Cadence Metering Pulse High Gain/Low Gain Local Metering Pulse Override/Polarity Reversal SX5T-500CUnable to Receive Calls SX5T TroubleshootingNo Power Unable to Make CallsSafety Information Conformance StatementsAircraft DrivingExposure to Electronic Devices ChildrenPatents TrademarksPhonecell SX5T CDMA2000 Telular Corporation, all rights reserved

CDMA SX5T-500C, SX5T CDMA2000, SX5T-505C, SX5T-535C, SX5T-500C, SX5T CDMA specifications

Telular's SX5T CDMA device line represents a significant advancement in wireless communications technology, primarily designed for use in Automatic Meter Reading (AMR), asset tracking, and telemetry applications. The SX5T series includes several models, each with unique characteristics that cater to varying customer needs within the CDMA2000 framework.

One of the standout models, the SX5T CDMA, leverages CDMA2000 technology for robust and reliable wireless connectivity. This technology offers greater capacity and improved voice quality compared to earlier generation systems. The SX5T CDMA is particularly noted for its flexibility in deployment, making it an ideal choice for industries requiring seamless communication solutions.

Another variant, the SX5T-505C, builds upon the solid foundation of the SX5T CDMA, incorporating enhanced features for more demanding applications. This model includes advanced remote management capabilities, allowing users to monitor and configure devices remotely, which can lead to significant cost savings and operational efficiencies.

The SX5T-535C model is designed with increased durability in mind, making it suitable for harsh environmental conditions. It boasts high-quality build materials and design, ensuring longevity and dependable performance even in the most challenging scenarios.

For a more budget-conscious option, the SX5T-500C provides essential functionality at a competitive price point. This model delivers reliable performance for basic telemetry applications, making it an optimal choice for smaller businesses or projects with tighter budgets.

All models within the SX5T series operate on the CDMA SX5T-500C standard, offering high-speed data transmission, which is crucial for applications that require real-time information transfer. The devices support seamless integration with existing infrastructure, ensuring that they can be easily incorporated into various communication systems.

Features common across the SX5T series include low power consumption, comprehensive security protocols, and extensive customization options, allowing users to adapt the devices for specific application requirements. These attributes, combined with Telular's commitment to innovation, position the SX5T CDMA product line as a leading choice for businesses looking to enhance their telemetry solutions and streamline operations in an ever-evolving technological landscape.
Top Page Image Contents