Connecting an SX5T Model With a Power Supply
Your SX5T has either a Power Supply (part #74007301) or a Battery Backup Unit (BBU; part #74006803). If your unit uses a Power Supply, please follow the instructions
below to connect the SX5T to your AC power. If it uses a BBU, please see “Connecting an SX5T Model With a BBU” on page 4.
To connect an SX5T model with a Power Supply:
1.Connect the barrel connector of the power supply to the AC power input receptacle of the SX5T - see Figure 3.
2.Plug the AC power cord into the power supply.
3.Plug the AC power cord into the AC Power outlet.
Hint:
If there are no emergency batteries in the SX5T, it will only power on if the AC/Battery switch is in the AC power position - see Figure 5 on page 3 for a detailed view.
4.Check the cellular signal strength and move the unit until you achieve the best signal possible - see LED Status Indicators on page 8 for more information.
Barrel Connector
AC Power
Input Receptacle
Battery |
| AC Power | Power |
Position |
| Position | |
|
|
| Supply |
|
|
|
AC Power
Figure 3 – Connect the SX5T to AC Power. | AC Power Cord |
|
Phonecell® SX5T CDMA2000 | 2 | User Manual |