Telular CDMA SX5T-500C, SX5T CDMA user manual Conformance Statements, Safety Information

Page 40

Conformance Statements

The SX5T 800/1900 MHz models are in conformance with all applicable FCC requirements.

FCC Part 15/Part 22/Part 24 Class B Compliance

This Phonecell® SX5T model has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15, Part 22 and Part 24 of the FCC rules. Changes or modifications not expressly approved by Telular Corporation will void your authority to operate the equipment per FCC part 15 paragraph 15.21.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment OFF and ON, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the antenna.

•Increase the separation between the equipment and the terminal.

•Connect the equipment into an outlet on a circuit different from that to which the terminal is connected.

•Consult your Authorized Telular Distributor or an experienced radio/TV technician for help.

Safety Information

The Phonecell® SX5T functions as both a radio transmitter and receiver. When it is ON, the SX5T receives and sends out radio frequency (RF) energy. The SX5T CDMAunit operates in the frequency ranges of 824 MHz to 894 MHz and / or 1850 MHz to 1910 MHz. When you use the SX5T, the cellular system handling your call controls the power level at which the unit transmits.

Exposure to RF (Radio Frequency) Energy

In 1991, the Institute of Electrical and Electronics Engineers (IEEE), and in 1992, the American National Standards Institute (ANSI), updated the 1982 ANSI Standard for safety levels with respect to human exposure to RF energy. After reviewing the available body of research, more than 120 scientists, engineers and physicians from universities, government health agencies and industry developed this updated Standard. In March, 1993, the U.S. Federal Communications Commission (FCC) proposed the adoption of this updated Standard.

The design of the Telular Phonecell® SX5T complies with this updated Standard. Of course, if you want to limit RF exposure even further than the updated ANSI Standard, you may choose to control the duration of your calls and operate your phone in the most power-efficient manner.

Safe Operation Requirement

The Phonecell® SX5T must be either wall mounted or desk mounted and should not be operated when any person is within 20 cm (8 inches) of the antenna.

Temperature Environment

Operating Temperature: From -10°C to +50°C ; Up to 95% relative humidity (non-condensing).

Storage Temperature: From -40°C to +60°C; Up to 95% relative humidity (non-condensing).

Antenna Care and Replacement

Do not use the Phonecell® SX5T with a damaged antenna. If a damaged antenna comes into contact with the skin, a minor burn may result. Replace a damaged antenna immediately. Use only a Telular-approved antenna. Unauthorized antennas, modifications, or attachments could damage the Phonecell® SX5T.

Phonecell® SX5T CDMA2000

36

User Manual

Page 39 Page 41
Image 40
Page 39 Page 41
Contents Phonecell SX5T CDMA2000 Contents Terms and Conditions for USE of Phonecell Products Product Telular CorporationTechnical Support Corporate HeadquartersTable of Contents Setup Ruim Card Installation Ruim Model OnlyTo connect an SX5T model with a Power Supply Connecting an SX5T Model With a Power SupplyHint Battery Operation To install emergency batteriesEmergency Batteries Connecting an SX5T Model With a BBU Backup Battery Unit To connect an SX5T model with a BBUSX5T Location and Installation Wall MountingConnectors GPS Antenna Mounting optional on SX5T-505C/-535C onlyDirect Connection Phone, Fax and Data Connection via Wall JacksLED Status Indicators Signal Strength LEDsGetting to Know Your SX5T LED ColorCallActivity Indicator LED Color Description Important Dial TonesUsing the SX5T Using In-Call FeaturesMaking Calls Receiving CallsAccessing Your Voicemail Using Call ForwardingMaking a Three-Way Call Press #Adjusting Your Phone’s Settings Volume LevelEntering Configuration Mode Changing the Lock CodeAuto-Send Delay Frequently Dialed Numbers Zero Delay DialingAudio Line Level Call BarringIndex * number # Where the options are as follows From Configuration Mode, press #Call Restrict SX5T-500C only Dial Tone After Remote Disconnect DtardYou would press # # from Configuration mode HotlineOne-Minute Alert TTY UseRestore User Defaults From Configuration Mode, press # Or 1 # , whereVoicemail Number One-Touch Voicemail RetrievalUsing an External Answering Machine Using Additional Hardware DevicesUsing a Fax Machine With Your SX5T Windows XP/Windows 2000 Setup for Data & PC Fax Press # Lock codeClick on Add… Phonecell SX5T CDMA2000 Select the 19200 bps Modem and click on Properties Control Panel System Hardware Device Manager Ports tab Phonecell SX5T CDMA2000 Windows 98 Setup for Data & PC Fax Select Standard 19200 bps Modem and click on Properties Phonecell SX5T CDMA2000 Phonecell SX5T CDMA2000 Choose Fax Mode Sending/Receiving a PC FaxSet Your Computer’s Port and Modem Speeds for PC Fax Choose the SX5T’s Fax PortSending/Receiving 1X Data Set Your Computer’s Port and Modem Speeds for 1X DataChoose the SX5T’s Data Port To Send or Receive 1X DataSending/Receiving Circuit Switched Data Choose Data ModeSet the SX5T’s Baud Rate for Circuit Switched Data Back to Voice mode Press #Advanced Programming Settings Entering Configuration Mode Advanced SettingsOn-Hook Idle Voltage Level Line ReversalRing Frequency Audio Input ImpedanceDisconnect Pulse Dial Tone Frequency SX5T-500C onlyLine Alert Cadence Caller ID Display Setting SX5T-500CDisconnect Tone Metering Pulse High Gain/Low Gain Local Metering Pulse Override/Polarity Reversal SX5T-500CSX5T Troubleshooting No PowerUnable to Receive Calls Unable to Make CallsSafety Information Conformance StatementsDriving Exposure to Electronic DevicesAircraft ChildrenPatents TrademarksPhonecell SX5T CDMA2000 Telular Corporation, all rights reserved

CDMA SX5T-500C, SX5T CDMA2000, SX5T-505C, SX5T-535C, SX5T-500C, SX5T CDMA specifications

Telular's SX5T CDMA device line represents a significant advancement in wireless communications technology, primarily designed for use in Automatic Meter Reading (AMR), asset tracking, and telemetry applications. The SX5T series includes several models, each with unique characteristics that cater to varying customer needs within the CDMA2000 framework.

One of the standout models, the SX5T CDMA, leverages CDMA2000 technology for robust and reliable wireless connectivity. This technology offers greater capacity and improved voice quality compared to earlier generation systems. The SX5T CDMA is particularly noted for its flexibility in deployment, making it an ideal choice for industries requiring seamless communication solutions.

Another variant, the SX5T-505C, builds upon the solid foundation of the SX5T CDMA, incorporating enhanced features for more demanding applications. This model includes advanced remote management capabilities, allowing users to monitor and configure devices remotely, which can lead to significant cost savings and operational efficiencies.

The SX5T-535C model is designed with increased durability in mind, making it suitable for harsh environmental conditions. It boasts high-quality build materials and design, ensuring longevity and dependable performance even in the most challenging scenarios.

For a more budget-conscious option, the SX5T-500C provides essential functionality at a competitive price point. This model delivers reliable performance for basic telemetry applications, making it an optimal choice for smaller businesses or projects with tighter budgets.

All models within the SX5T series operate on the CDMA SX5T-500C standard, offering high-speed data transmission, which is crucial for applications that require real-time information transfer. The devices support seamless integration with existing infrastructure, ensuring that they can be easily incorporated into various communication systems.

Features common across the SX5T series include low power consumption, comprehensive security protocols, and extensive customization options, allowing users to adapt the devices for specific application requirements. These attributes, combined with Telular's commitment to innovation, position the SX5T CDMA product line as a leading choice for businesses looking to enhance their telemetry solutions and streamline operations in an ever-evolving technological landscape.
Top Page Image Contents