Windows 98 Setup for Data & PC Fax
Contact your service provider to determine data/PC fax service availability, then follow these steps.
1.Connect and Select Data Ports.
Serial Connection – default setting (Allows PC Fax, 1X Data and Circuit Switched Data)
·Use a Telular serial cable (part #1L01A042 or 81025801) to connect the computer’s serial port to the SX5T’s data port.
·Enter Configuration Mode.
Press # | * | 0 | * <lock code> # . |
·Set the SX5T Data Port to Serial.
Press # | * | 1 | 3 | 5 | * | 0 | # . |
Modem/Phone Connection (Allows PC Fax and Circuit Switched Data)
·Use a standard telephone cord to connect the computer’s modem out port to either of the SX5T’s phone (RJ11) jacks.
·Enter Configuration Mode.
Press # | * | 0 | * <lock code> # . |
·Set the SX5T Data Port to RJ11.
Press # | * | 1 | 1 | 3 | * | 1 | * | 0 | # . |
Note:
The SX5T supports data transfer over serial and modem/phone (RJ11) connections for Windows 98 PCs. Data over USB is not supported for Windows 98.
2.Set Baud Speed.
·Enter Configuration Mode.
| Press # | * | 0 | * <lock code> |
| # . |
|
|
|
|
| |
· | For fax, set speed to 19200. Press # | * |
| 1 | 3 | 6 | * | 2 | # . | |||
· | For data, set speed to 115200. Press | # | * | 1 | 3 | 6 | * | 5 | # . |
3.Install the SX5T as a new modem by opening the Start > Settings > Control Panel then clicking on the Modems phone icon.
Phonecell® SX5T CDMA2000 | 24 | User Manual |