Sanyo CLT-J30 instruction manual LCD Screen Messages, Error

LCD SCREEN MESSAGES

The following indicators show the status of a message or of the phone.

BLOCKED NUMBER/				The person is calling from a number that has
NAME/CALLER				been blocked from transmission.
DND				Do Not Disturb is activated.
EMPTY				There is no record stored to the selected
				directory location.
	ERROR			Caller information has been interrupted during
				transmission or the phone is excessively noisy.
		ENTER NAME		Prompt telling you to enter name in directory.
ENTER TEL NUMBR				Prompt to enter the telephone number for
				directory.
DELETE ALL?				Prompt asking you if you want to erase all
				Caller ID information.
DELETE?				Prompt asking you if you want to erase the
				current Caller ID entry or a directory entry that
				is shown on screen.
			END OF LIST	Indicates that there is no additional information
				in Caller ID list.
INCOMPLETE DATA				The telephone provider did not send all Caller
				ID information because the signal was weak or
				the call was interrupted.
MESSAGE WAITING				Caller has left a message (you must subscribe
				to voice mail service offered by your local
				phone company for this to work).
NEW				Indicates call or calls have not been reviewed.
NO CALLS				There are no Caller ID records stored to
				memory.
NO DATA				No Caller ID information was received.
REPT				Repeat call.
UNKNOWN NUMBER/				The incoming call is from an area not serviced
NAME/CALLER				by Caller ID, or the information was not sent.
PAGING				Someone has pressed the PAGE key on the
				base.
			VIP	Caller has been marked as a Very Important
				Person in directory.
RINGER=OFF				Ringer ON/OFF switch on the right side is set
				to OFF.
				26