Handset locator Paging function, Mute key

BASICS

Handset locator (Paging function)

This feature helps to locate a misplaced handset.

1.Press PAGE on the base, the screen shows “PAGING”. The handset beeps continuously for about 2 minutes or until you press any key on the handset.

2.To stop the paging, do one of the following:

•

Press PAGE on the base.

Press TALK/CALL BACK, this will enter talk mode. Press any button on the handset.

Note: You can still page the handset with the ringer off.

MUTE key

To have a private, off-line conversation, use the MUTE feature. The caller on the other end of the line cannot hear you, but you can still hear them.

To mute the microphone:

1.Press MUTE in TALK mode. The screen shows “MUTE”.

2.Press MUTE again to return to your phone conversation.

Low battery warning

1.If the battery is low and the phone is in TALK mode, a warning tone consisting of 2 short beeps will sound from the handset and the LED will flash every 15 seconds. “LOW BATTERY” shows on screen.

2.If the battery is low and the phone is in STANDBY mode, the LED on handset will flash every 15 seconds, and “LOW BATTERY” shows on screen.

Voice mail indicator

When you subscribe to a voice mail service offered by your phone company, the phone alerts you when voice mail has been received. MESSAGE WAITING appears on screen for 60 seconds when a voice mail is received. The LED on the base flashes to indicate there is a voice mail waiting. After the voice mail has been reviewed, MSG WAITING OFF appears on screen, and the indicator stops flashing.

Note: The indicator does not work with your answering machine. The phone will only work with an FSK type of VMWI System. It will not work with the Stutter Dial Tone type of VMWI System.