DIRECTORY
Reviewing and deleting directory contents
1.Make sure the phone is OFF (not in TALK mode).
2.Press MEM.
3. Use CID/VOL 
or to scroll through the directory until the desired name/number is shown, or use the number pad to select a memory location. The selected telephone number and name show on screen.
4.While the entry is displayed, press CH/DEL to delete the entry. The screen shows “DELETE?”
5.Press CH/DEL again to delete the entry. “DELETED” shows on screen.
Chain dialing from the directory
Use this feature to make calls that require a sequence of numbers such as using a calling card for a frequently called long distance number. You can dial each part of the sequence from a different entry of the directory. The following example shows how you can use chain dialing to make a call through a long distance service:
The Number for: | Memory Location |
Long distance access number | 7 |
Authorization code | 8 |
Frequently called long distance number | 9 |
1.Make sure the phone is in TALK mode.
2.Press MEM and then press 7.
3.When you hear the access tone, press MEM and then press 8.
4.At the next access tone, press MEM and then 9.
Tip: Wait for the access tones before pressing the next memory key, or your call might not go through.
22