Sanyo CLT-J30 Dial tone is OK, but cannot dial out, Handset does not ring, Phone beeps

Page 28

TROUBLESHOOTING

Dial tone is OK, but cannot dial out

•Make sure the TONE/PULSE dialing mode is set to TONE or PULSE according to your phone service.

Handset does not ring

•Make sure the RINGER switch on the handset is turned to ON.

•You may have too many extension phones on your line. Try unplugging some phones.

•See solutions for No dial tone.

You experience static, noise, or fading in and out

•Change channels.

•Is handset out of range? Move closer to the base.

If you hear 3 short beeps when you press TALK/CALL BACK, you are out of range.

•Does the base need to be relocated?

•Charge battery.

•Make sure base is not plugged into an outlet with another house- hold appliance.

Phone beeps

•Place handset in base for a minimum of 20 seconds to reset the security code. If that does not work, charge battery for 12 continuous hours.

•Clean charging contacts on handset and base with a soft cloth or an eraser.

•See solutions for No dial tone.

•Replace battery.

Dialing from Memory

•Did you program the directory keys correctly?

•Did you follow proper dialing sequence?

•Make sure the TONE/PULSE dialing mode is set to TONE or PULSE according to your phone service.

•Did you reprogram directory after a power outage or battery replacement?

28

Image 28

Contents CLT-J30 Sanyo Canada IncTable of Contents Recycling NICKEL-METAL Hydride Batteries Main Features GHz Technology Other featuresIntroduction Compander Plus Noise ReductionGetting Started Checking package contentsModular jack Tone/pulse setting Battery setupTelephone line connection Mounting on a wall Digital Security SystemNames and Controls HandsetBase Unit Language setting Area code settingInitial Programming Press FLASH/PROG until 1 ENG 2 FRA 3 ESP shows on screenDND setting LCD contrastResetting to default Idle animationVolume adjustment Ringer switchBasics Receiving a callPre-dialing up to 32 digits Press TALK/CALL Back Changing the pre-dial numberRedialing Fast redialing Press TALK/CALL BackLow battery warning Voice mail indicatorHandset locator Paging function Mute keyCaller ID with Call Waiting Caller ID FeaturesCaller ID list Format Caller ID numbers Reviewing Caller ID listStoring Caller ID entries in the directory Dialing a Caller ID number Deleting the displayed entry Deleting entries from the Caller listDeleting all entries Directory Store a number in the directoryChanging a stored number Replacing a directory entry with a Caller ID entryMaking calls from the directory Chain dialing from the directory Reviewing and deleting directory contentsNumber for Memory Location Changing the Battery Battery replacement and handlingChanging the Face Plates Power FailureRecycling NICKEL-METAL Hydride Batteries Light Signals Headset Jack and Belt ClipError LCD Screen MessagesSound Signals TroubleshootingCaller ID error message No displayDial tone is OK, but cannot dial out Handset does not ringYou experience static, noise, or fading in and out Phone beepsMaintenance Causes of poor receptionMaximize Battery Performance Keep the contacts cleanRefresh battery Charge it for a full 12 hoursTechnical Information Technical Information Sanyo Comfort Warranty What is not CoveredSOS Help Line Between 830 am 700 pm EST