Sanyo CLT-J30 Pre-dialing up to 32 digits, Press TALK/CALL Back Changing the pre-dial number

BASICS

Pre-dialing (up to 32 digits)

1.Make sure the phone is OFF (not in TALK mode).

2.Enter the telephone number. The number is displayed as you enter it.

3.Press TALK/CALL BACK.

Note: Pressing *TONE will exit pre-dialing.

Changing the pre-dial number

1.Make sure the phone is OFF (not in TALK mode).

2.Enter the telephone number.

3.Press CH/DEL to delete digits one by one.

4.Re-enter the number.

Redialing

1.Make sure the phone is OFF (not in TALK mode).

2.Press TALK/CALL BACK.

3.Press REDIAL to redial the last number (up to 32 digits).

Fast redialing

1.Press TALK/CALL BACK.

2.Enter the telephone number you want to dial.

3.If the line is busy, press REDIAL. The phone will drop the line for two seconds and redial again.

FLASH key

Use the FLASH/PROG key to activate custom calling services such as Call Waiting or Call Transfer (available through your local phone company).

Tip: Do not use TALK/CALL BACK to activate custom calling services such as Call Waiting, or you will hang up the phone.

CH (Channel)/DEL key

While talking, you might need to manually change the channel to get rid of static. Press the CH/DEL key to switch to a clear channel.

* TONE key

This feature enables Pulse service phone users to access touch-tone services offered by banks, credit card companies, etc.

1.Call the bank’s information line.

2.Press *TONE after your call is answered.

3.Follow the voice instructions to complete your transaction.

4.Hang up when finished. The phone returns to Pulse service.

14