Samsung DCS 50si manual Dialing Features, Station Call Pickup, Group Call Pickup, Speed Dialing

•Dial the destination number (e.g., 202)

OR

Press UP or DOWN to select the destination Press the right soft key to move the cursor

•Dial 1 to set

OR

Press UP or DOWN to select YES or NO

•Press TRSF to store and exit

STATION CALL PICKUP

To pick up (answer) a call ringing at another station, lift the handset and dial 65 plus the extension number of the ringing phone.

NOTE: If the Hot Keypad feature has been turned off, you must first lift the handset or press SPK or MONITOR before you begin dialing.

GROUP CALL PICKUP

To pick up (answer) a call ringing in any pickup group, lift the handset and dial 66 plus the desired group number 01–20or press the flashing GROUP PICKUP key if available.

NOTES:

1.A group pickup key can have an extender for a specific pickup group.

2.If the Hot Keypad feature has been turned off, you must first lift the handset or press SPK or the MONITOR key if you are using a 7B phone before dialing the access code.

3.Station and group pickup features cannot be used to answer recalls to a station, only new ringing calls and operator recalls.

DIALING FEATURES

SPEED DIALING

You can dial a preprogrammed telephone number stored in the system-wide speed dial list of numbers 500–999 or from your personal list of numbers 00–49:

•With the handset on-hook, press the SPD key or dial 16.

•Dial the desired speed dial number.

•The telephone number is automatically dialed for you.

NOTE: If the Hot Keypad feature has been turned off, you must first lift the handset or press SPK or MONITOR before you begin dialing.

PROGRAMMING PERSONAL SPEED DIAL NUMBERS

You can program frequently dialed telephone numbers in a personal speed dial list. A station may be assigned up to fifty numbers, 00–49. See your system administrator to determine the amount assigned to your station.

•While on-hook, press TRSF and then dial 105.

•Dial a speed dial number (00–49).

•Dial a line or line group access code.

•Dial the telephone number to be stored (18 digits maximum). It can include #, ✱, FLASH and PAUSE.

•Press TRSF to store the number.

NOTE: If the Hot Keypad feature has been turned off, you must first lift the handset or press SPK or the MONITOR key if you are using a 7B phone before you begin dialing.

For the purposes of programming speed dial numbers, the programmable keys in the bottom row are known as A, B, C, D, E and F and are defined below.

				24 BUTTON KEYSET
	12 BUTTON KEYSET		PROGRAMMABLE KEYS
PROGRAMMABLE KEYS					LAYOUT
		LAYOUT

A B C D E F

A B C D E F

20 21