HOT KEYPAD
On the DCS, your keyset’s keypad can be made “live” or “hot” so that it is not necessary to lift the handset or press SPK or the MONITOR key before you begin dialing. Calls can be made and features activated by simply dialing the C.O. line number, trunk group access code, intercom number or feature access code. To activate this feature:
•With the handset
•Dial 51 to turn the Hot Keypad on or 50 to turn it off.
•Press TRSF to store your selection.
KEY CONFIRMATION TONE
You can hear a short beep (confirmation tone) each time you press a button on the dial pad. This tone can be turned on or off.
•While
•Dial 60 to turn tones off or 61 to turn tones on.
•Press TRSF to store your selection.
REJOINING A PAGE
This feature allows you to hear the remaining portion of an ongoing internal page after you return your keyset to idle. To enable this feature:
•With the handset
•Dial 71 to turn this feature on or 70 to turn it off.
•Press TRSF to store your selection.
RING PREFERENCE
This feature automatically answers ringing calls when you lift the handset or press the ANS/RLS or the MONITOR key if you are using a 7B phone. This method will always answer calls in the order they arrived at your keyset. When you turn ring preference off, you must press the flashing button to answer a call, allowing you to answer calls in the order you choose.
•With the handset
•Dial 81 to turn ring preference on or 80 to turn it off.
•Press TRSF to store your selection.
DISPLAY FEATURES
INTERACTIVE DISPLAY KEYS
The three keys below the display are substitutes for dedicated feature keys and access codes. Pressing one of these keys has the same effect as pressing a programmable key. These keys are called soft keys as their functions are not fixed. They change to present you with the best options for that call condition. The use of soft keys allows the programmable keys to be used for more DSS and speed dial keys.
The SCROLL key is used to display options available to the user at a particular time or during a specific procedure. Press this key once while in the idle state to view the three main categories available.
201:STN NAME CALL OTHER ANS
ANSWER: Guides you through the options to answer calls.
OTHER: Guides you through features other than making or answering calls.
CALL: Guides you through the options to make a call.
Select one of the main categories: CALL, OTHER or ANS (ANSWER). Press the SCROLL key to display additional options available under each of the three main categories.The symbol á displayed as the last character on the lower line of the display indicates that there are additional options. Press the SCROLL key to display these additional options.
User instructions will be displayed in lower case letters. Options assigned to soft keys will be in upper case letters.
DIRECTORY INFORMATION
An 11 character directory name can be assigned to each extension number. Display keyset users can view the name of the called or calling station before answering.
Each outside line can have an 11 character directory name. Incoming calls can be easily identified and answered with different greetings.
Outside and internal calls ringing to a station group will display [CALL FOR xxx] where xxx is the station group number.This allows you to answer calls directed to you differently than calls directed to your group.
34 | 35 |