Advanced Features
28
Procedure:
Use the menu.
1g to access the menu.
2f or h to Contacts and press g to select.
3f or h to the required subscriber alias or ID and press g to select.
4f or h to Radio Check and press g to select.
5The display shows transitional mini notice, indicating the request is in progress. The green LED lights up.
6Wait for acknowledgement.
7If successful, a positive indicator tone sounds and the display shows positive mini notice.
OR
If unsuccessful, a negative indicator tone sounds and the display shows negative mini notice.
8Radio returns to the subscriber alias or ID screen.
If the ebutton is pressed when the radio is waiting for acknowledgement, a tone sounds, and the radio terminates all retries and exits Radio Check mode.
You can also initiate Radio Check via manual dial (see Initiating a Radio Check by Manual Dial on page 82).
Remote Monitor 
Use the Remote Monitor feature to turn on the microphone of a target radio (subscriber IDs only). No audible or visual indication is given to the target radio. You can use this feature to monitor, remotely, any audible activity surrounding the target radio.
Your radio must be programmed to allow you to use this feature.
Initiating Remote Monitor
Procedure:
Use the programmed Remote Monitor button.
1Press the programmed Remote Monitor button.
2f or h to the required subscriber alias or ID and press g to select.
3The display shows transitional mini notice, indicating the request is in progress. The green LED lights up.
4Wait for acknowledgment.
5If successful, a positive indicator tone sounds and the display shows positive mini notice. Your radio starts playing audio from the monitored radio for a programmed duration and display shows Rem. Monitor.
Once the timer expires, the radio sounds an alert tone and the LED turns off.
OR
English