Page 93
OR
Key in the subscriber alias or ID and press g.
5 f or h to Remote Mon. and press g to select.
6 The display shows transitional mini notice, indicating the request is in progress. The green LED lights up.
7 Wait for acknowledgment.
8 If successful, a positive indicator tone sounds and the display shows positive mini notice. Your radio starts playing audio from the monitored radio for a programmed duration and display shows Rem. Monitor.
f or h to Manual Dial and press g to select.
to select.
f or h to Contacts and press g
g to access the menu.
1
2
3
4 If there was previously dialed ID, the ID appears along with a blinking cursor. Use the keypad to edit the ID. Press gto select.
Procedure:
Initiating Remote Monitor by Manual Dial
If the ebutton is pressed when the radio is waiting for acknowledgement, a tone sounds, and the radio terminates all retries and exits Radio Check mode.
Radio returns to the subscriber alias or ID screen.
9
Keypad Microphone Features
82
8The display shows <Zone> Selected momentarily and returns to the selected zone screen.
Initiating a Radio Check by Manual Dial 
Procedure:
1g to access the menu.
2f or h to Contacts and press g to select.
3f or h to Manual Dial and press g to select.
4If there was previously dialed ID, the ID appears along with a blinking cursor. Use the keypad to edit the ID. Press gto select.
OR
Key in the subscriber alias or ID and press g.
5f or h to Radio Check and press g to select.
6The display shows transitional mini notice, indicating the request is in progress. The green LED lights up.
7Wait for acknowledgement.
8If successful, a positive indicator tone sounds and the display shows positive mini notice.
OR
If unsuccessful, a negative indicator tone sounds and the display shows negative mini notice.
