Motorola XPR 5550 manual Sending an Emergency Alarm with Voice to Follow

Page 59

If your radio is set to Silent with Voice, it does not display any audio or visual indicators during Emergency mode, but allow incoming calls to sound through the radio’s speaker. The indicators only appear once you press the PTT button to initiate, or respond to, the call.

Sending an Emergency Alarm with Voice to Follow

This feature allows you to send an Emergency Alarm to a group of radios. Your radio’s microphone is automatically activated, allowing you to communicate with the group of radios without pressing the PTT button.

This activated microphone state is also known as “hot mic”.

If your radio has Emergency Cycle Mode enabled, repetitions of hot mic and receiving period are made for a programmed duration.

NOTE: During Emergency Cycle Mode, received calls sound through the radio’s speaker.

If you press the PTT button during the programmed receiving period, you will hear a prohibit tone, indicating that you should release the PTT button. The radio ignores the PTT press and remains in Emergency mode.

NOTE: If you press the PTT button during hot mic, and continue to press it after the hot mic duration expires,

the radio continues to transmit until you release the PTT button.

Procedure:

1Press the programmed Emergency On button or the Emergency footswitch.

2The display shows Tx Alarm and the destination alias. The green LED lights up and the Emergency icon appears.

OR

The display shows Tx Telegram and the destination alias. The LED lights up solid green and the Emergency icon appears.

3Once the display shows Alarm Sent, speak clearly into the microphone. When hot mic has been enabled, the radio automatically transmits without a PTT press until the hot mic duration expires.

While transmitting, the green LED lights up and the Emergency icon appears.

4The radio automatically stops transmitting when:

Once the cycling duration between hot mic and receiving calls expires, if Emergency Cycle Mode is enabled.

OR

Once the hot mic duration expires, if Emergency Cycle Mode is disabled.

5To transmit again, press the PTT button.

OR

Advanced Features

47

English

Image 59

Contents Mototrbo Page Declaration of Conformity Declaration of ConformityDeclaration of Conformity Contents Activating or Deactivating Call Ringers for Text Deleting All Sent Text Messages from Sent Items Keypad Microphone Features Appendix Maritime Radio Use in the VHF Frequency Range AccessoriesLimited Warranty Viii Software Version Important Safety InformationComputer Software Copyrights Computer Software CopyrightsGetting Started How to Use This User GuideWhat Your Dealer/System Administrator Can Tell You Powering Up the Radio Radio Controls Identifying Radio Controls Assignable Radio Functions Programmable ButtonsTransmit Interrupt Remote Dekey Assignable Settings or Utility Functions Accessing the Programmed FunctionsPush-To-Talk PTT Button Switching Between Conventional Analog and Digital ModeIP Site Connect Using the Volume/Channel KnobPush the Volume/Channel Knob again Linked Capacity Plus Capacity PlusIdentifying Status Indicators Identifying Status IndicatorsDisplay Icons Call Icons Mini Notice Icons Advanced Menu IconsSent Item Icons Bluetooth Device IconsLED Indicators Indicator Tones Audio Tones Selecting a Zone ProcedureReceiving and Making Calls Scroll Up/Down buttons, or Selecting a ChannelReceiving and Responding to a Radio Call Receiving and Responding to a Private Call Receiving and Responding to a Group Call Receiving an All Call CallsMaking a Selective Call Receiving and Responding to a Selective Call Making a Group Call Making a Radio Call Making a Private Call Making an All Call Press the programmed Transmit Interrupt Remote Dekey button Stopping a Radio Call Making a Selective Call Permanent Monitor Talkaround Sending a Radio Check Advanced FeaturesRadio Check Initiating Remote Monitor Remote Monitor Stopping Remote Monitor Adding a New Entry to the Scan List Scan Lists Viewing an Entry in the Scan List Editing the Scan List Deleting an Entry from the Scan List Setting and Editing Priority for an Entry in the Scan List Starting and Stopping Scan ScanRelease the Nuisance Channel Delete button. Responding to a Transmission During a Scan Deleting a Nuisance Channel Restoring a Nuisance ChannelVote Scan Making a Private Call from Contacts Making a Group Call from Contacts Assigning an Entry to a Programmable Number Key Setting Default Contact Activating or Deactivating Call Ringers for Private Calls Call Indicator Settings Activating or Deactivating Call Ringers for Call Alerts Activating or Deactivating Call Ringers for Text Message Assigning Ring Styles Escalating Alarm Tone Volume Deleting a Call from a Call List Call Log Features Viewing Recent Calls Receiving and Responding to a Call Alert Call Alert Operation Viewing Details from a Call List Making a Call Alert from the Contacts List Making a Call Alert with the One Touch Access ButtonEmergency Operation Receiving an Emergency Alarm Sending an Emergency Alarm Responding to an Emergency Alarm Sending an Emergency Alarm with Call Sending an Emergency Alarm with Voice to Follow Reinitiating an Emergency Mode Sending a Quick Text Message Text Messaging Features Exiting Emergency Mode Viewing a Saved Text Message Managing Text Messages in the Drafts Folder Forwarding a Text Message Resending a Text Message Procedure Deleting a Saved Text Message from Drafts Managing Fail-to-Send Text Messages Sending a Sent Text Message Managing Sent Text Messages Viewing a Sent Text Message Advanced Features Reading a Text Message Deleting All Sent Text Messages from Sent Items Receiving a Text Message Viewing a Telemetry Status Text Message from the Inbox Managing Received Text Messages Viewing a Text Message from the Inbox Replying to a Text Message with Quick Text Deleting All Text Messages from the Inbox Deleting a Text Message from the Inbox Sending MDC Message Encode to Dispatcher Analog Status Update Sending Status Update to Predefined Contact Analog Message EncodePrivacy Conventional Multi-Site Controls Starting an Automatic Site Search Stopping an Automatic Site Search Starting a Manual Site Search Security Radio Disable Radio Enable Lone Worker Bluetooth Finding and Connecting to a Bluetooth Device Turning Bluetooth On or Off Viewing Device Details Disconnecting from a Bluetooth Device Switching Audio Route Turning the Radio Tones/Alerts On or Off Accessing the Notification ListNotification List Utilities Turning the Talk Permit Tone On or Off Setting the Tone Alert Volume Offset Level Setting the Power Level Adjusting the Display Brightness Changing the Display Mode Turning the External Public Address System On or Off Setting the Squelch Level Turning Horns/Lights On or Off Turning the Public Address System On or Off Turning the Introduction Screen On or Off Turning the LED Indicators On or Off Language Setting Dual Knob Operation Preference Voice Announcement Turning the Option Board Features On or Off Identifying Cable Type Analog Mic AGC Menu Timer Call Forwarding Intelligent Audio Digital Mic AGC Checking the Radio Alias and ID Accessing General Radio Information Checking the GPS Information Checking the Firmware Version and Codeplug VersionKeypad Microphone Features Number of Times Key is Pressed Using the Keypad Selecting a Zone by Alias Search Additional Advanced Features Turning Keypad Tones On or Off Initiating a Radio Check by Manual Dial Making a Private Call by Manual Dial Making a Group, Private, Phone or All Call by Alias Search Editing the Scan List by Alias Search Viewing an Entry in the Scan List by Alias Search Deleting an Entry from the Scan List Storing an Alias or ID from a Call List Writing and Sending a Text Message Text Messaging Making a Call Alert by Manual Dial Replying to Text Messages from the Inbox Editing a Quick Reply Message Accessing the Drafts Folder Forwarding a Text Message by Manual Dial Editing and Sending a Saved Text Message Procedure Editing a Text Message Dual Tone Multi Frequency Dtmf Radio Enable via Manual Dial Radio Disable via Manual Dial Accessing the Radio from Password Password Lock Features Unlocking the Radio from Locked State Turning the Password Lock On or Off Changing the Password Editing FPC Mode Parameters Front Panel Configuration FPC Entering FPC Mode Antennas AccessoriesCables AudioSpeakers Desktop AccessoriesMiscellaneous Accessories Mounting Kits Non-Commercial Call Channel Appendix Maritime Radio Use in the VHF Frequency RangeSpecial Channel Assignments Emergency ChannelReceive Operating Frequency RequirementsTable A-1 VHF Marine Channel List Frequency MHz Number 102 Motorola Communication Products Limited Warranty104 105 Page 68009504001-B