Procedure:
Press the programmed VOX button to toggle the feature on or off.
OR
Follow the procedure below.
1g to access the menu.
2f or h to Utilities and press g to select.
3f or h to Radio Settings and press g to select.
4f or h to VOX and press g to select.
5Press g to enable VOX. The display shows 9 beside Enabled.
OR
Press g to disable VOX. The 9 disappears from beside Enabled.
If the Talk Permit Tone feature is enabled (see Turning the Talk Permit Tone On or Off on page 68), use a trigger word to initiate the call. Wait for the Talk Permit Tone to finish before speaking clearly into the microphone.
Turning the Option Board Feature(s) On or Off
Option board capabilities within each channel and can be assigned to programmable buttons. Refer to your dealer or system administrator for more information.
Procedure:
Press the programmed Option Board Feature button to toggle the feature on or off.
Identifying Cable Type
You can select the type of cable your radio uses.
Procedure:
1g to access the menu.
2f or h to Utilities and press g to select.
3f or h to Radio Settings and press g to select.
4f or h to Cable Type and press g to select.
5The current cable type is indicated by a 9.
Voice Announcement
This feature enables the radio to audibly indicate the current Zone or Channel the user has just assigned, or programmable button press. This audio indicator can be customized per customer requirements. This is typically useful when the user is in a difficult condition to read the content shown on the display.
Use the following features to toggle Voice Announcement on or off.
Procedure:
Advanced Features
73
English