VTech i6789, i6790 important safety instructions To one minute for this to take place

Troubleshooting

Problem	Suggestion
The answering system	• Make sure your remote access code is correct (see page 29).
does not respond to	• Make sure you are calling from a touch-tone telephone. When dialing a number, you should
remote commands.	hear tones. If you hear clicks, then it is not a touch-tone telephone and cannot activate the
	answering system.
	• The answering system may not detect the remote access code when your announcement is
	playing. Wait until the announcement is over before entering the code.
	• There may be interference on the telephone line you are using. Press the dial pad keys firmly
	when dialing.
Common cure for	• If the unit is not responding normally, trying putting the cordless handset in the telephone base
electronic equipment.	or the charger. If it does not seem to respond, try the following (in the order listed):
	• Disconnect the power to the telephone base.
	• Disconnect the battery on the cordless handset.
	• Wait a few minutes before connecting power to the telephone base.
	• Re-install the battery and place the cordless handset into the telephone base or charger.
	• Wait for the cordless handset to synchronize its connection with the telephone base. Allow up
	to one minute for this to take place.

www.vtechphones.com

48

Appendix