Telephone Operation
Handset Ringer Style/Battery Save
You can select from four different handset ringer styles, or turn the ringer off and extend the battery life.
1.Make sure the handset is idle.
2.Press PROG.
3.Press 
until the screen displays RINGER: and the current setting.
4.Press SELECT. The current setting blinks, and you will hear a sample of the ring.
5.Press 
or 
to select RINGER:1, 2, 3, 4 or OFF. You will hear a sample of each ring.
6.Press SELECT to choose the displayed ringer setting.
Temporary Tone Dialing
If you have dial pulse (rotary) service only, you can change from pulse to touch tone dialing during a call by pressing *TONE. This is useful if you need to send touch tone signals for access to telephone banking or long distance services.
1.Dial the number.
2.Press *TONE. Buttons pressed after this will send touch tone signals.
3.After you hang up, the phone automatically returns to dial pulse service.
Call Forward
An external call can be forwarded from one handset to the other handset by following these steps.
1. While on a call, press SELECT to forward the call to the other handset (HS2). The first handset (HS1) will show:TRANSFERING CALL
HS2 will show:
CALL TRANSFERING
NOTE: If HS2 cannot be found, HS1will generate a sad tone and continue the call automatically.
Before HS2 answers, HS1 can press PHONE to cancel the forward function and continue the external call.
2.Press any key except OFF on HS2 to answer the forwarded call. HS1 will return to the idle screen.
NOTE: If HS2 does not respond within 30 seconds, HS1 will start ringing until PHONE is pressed. If the returned call is not answered within another 30 seconds, the external call will end automatically.
13
Basic Operation
13 | 11/1/2005, 12:46 PM |