VTech Cordless Telephone manual Setting Up Your Answering System, Feature Summary

Basic Operation

Answering System Operation

Setting Up Your Answering System

You can set up one feature at a time, or you can set up a feature and then move on to set up another feature.

1.Make sure the answering system is ON.

2.Press MENU until the system announces the feature you want to set. Refer to the Feature Summary below for a description of the features and your choices.

3.Press CHANGE until the system announces the desired setting.

4.Press TIME/SET to confirm your selection.

5.Press MENU to move on to the next feature, or press a MAILBOX button to exit Feature Setup.

Feature Summary

DefaultSystemsettingsannounces:indicat d by * .Description/directions:

“Set Security Code”		Use CHANGE to choose the remote access code
50	*	you will use to access features and functions of the
		answering system from a touch tone phone. You can
		select any two digit code, from 40 to 99.

“Set Audible Message Alert ” When message alert is turned on, the base beeps

Off *	once every 10 seconds when new messages
On	have been received.
“Set Announce Only”	When you turn Announce Only On, callers hear
Off *	your announcement, but cannot leave a message.
On
“Set Base Ringer”	Turn the base ringer on or off.
On *
Off
“Set Number of Rings”	Choose how many times the phone will ring
2	before the system answers a call.
4 *	With toll saver active, the system answers after two
6	rings when you have new messages and after
Toll Saver	four rings when you have no new messages.

NOTES:

1.To advance the remote access code by increments of 10, press and hold

CHANGE.

2.You can exit feature setup at any time by pressing a MAILBOX button.

26

91-000171-030-000 manual.pmd 26 11/1/2005, 12:46 PM