VTech Cordless Telephone manual Installation, Before You Install

Page 8

Getting Started

Installation

Before You Install

1.Choose a location for the base near an electrical outlet and a telephone jack. This phone requires a modular telephone jack and a standard electri- cal outlet (110v AC) not controlled by a wall switch.

2.Install the handset battery. Use only VTech batteries.

a). Align the two holes in the plug with the socket pins, then snap the plug into place.

b). Place the battery in the compartment with the wires in the lower right corner. Angle the top of the battery under the top claws first, then snap the bottom of the pack in. Place the wires under the guide, located below the battery.

c). Replace battery compartment cover.

a

c

3.Plug the DC connectors to the base and charger separately. Plug the AC adaptors into electrical outlets separately. Connect the telephone line cord to the jack on the base, and the other end to a modular telephone jack, as illustrated below.

4. Place the handset in the base or charger. Charge the battery at least 15 hours for first charging.

8

91-000171-030-000 manual.pmd

8

11/1/2005, 12:46 PM

Image 8

Contents Need HELP? Important Safety Instructions Important Safety Instructions Before You Begin Parts Check List Handset Layout LCDBase Unit Layout Installation Before You InstallTable/Desk Installation Installation Telephone Operation HoldUse/Charging ChargingCall Forward Handset Ringer Style/Battery SaveTemporary Tone Dialing Battery needs to be recharged Display Screen MessagesThere is a call coming Handset is waiting for a dial toneTelephone Memory Store a Number/Name in MemoryEdit a Number/Name Stored in Memory Delete a Number/Name Stored in MemoryDial a Memory Number Basic OperationReassign Locations in Memory Telephone Directory Store a Number/Name in the DirectoryEdit a Number/Name Stored in the Directory Delete a Number/Name Stored in the DirectoryMove a Number/Name to the Memory Dial a Number from the DirectoryCaller ID Operation About Call History Caller IDReview Call History Delete Records from Call HistoryDial a Displayed Number Locate the record in call history that you want to dialStore a Call History Record in the Directory Dial ProgramAudible Indicators Setting the ClockAnswering System Operation About MailboxesTo Delete Your Announcement Record Your AnnouncementTo Review Your Announcement at Any Time Setting Up Your Answering System Feature SummaryRings when you have new messages and after Toll Saver Four rings when you have no new messagesAdjust Playback Volume Listen to, Save & Delete MessagesPlay Messages Delete MessagesMessage Window Display Call Screening/InterceptRecord a Memo Press REC/MEMOVoice Menu Remote Access CommandsConnect with the Answering System From a Remote Location Function Batteries Battery Care and MaintenanceReplacing the Handset Battery Belt Clip Headset OperationHeadset Jack Handset does not ring when you receive a call You hear other calls while using your phoneCase of Difficulty Phone doesn’t work at allCommon cure for electronic equipment Your answering system is not recording messagesYou cannot hear recorded messages CL is flashing in the base message window displayMaintenance Warranty Statement What does this limited warranty cover?How long is the limited warranty period? What is not covered by this limited warranty?How do you get warranty service? Other LimitationsWarranty Statement FCC, Acta and IC Regulations FCC PartFCC Part 68 and Acta VTech Communications, IncRights of the telephone company IC Industry Canada FCC, Acta and IC Regulations Rbrc Seal Technical Specifications Nominal Effective RangeTable Of Contents Additional Information Issued