Telephone Directory
to alert you that the calls from this number by changing to a distinctive ringer after the first ring. Choose N for a normal ringer.
8.Press SELECT or PROG to confirm your selection. If you chose Y in Step 7, a D will be displayed with the directory entry.
NOTE: When the memory is full the screen will display MEMORY FULL, an error tone sounds and you will not be able to store a new number until you delete a stored number to make room for another entry.
Edit a Number/Name Stored in the Directory
1.Press 
(DIR). The screen displays DIRECTORY.
2.Press 
or 
to scroll alphabetically through entries stored in directory.
— OR —
Press the dial pad key for the first letter of the entry you want to edit.
3.When the screen displays the entry you want to edit, press SELECT. Then press 
until EDIT flashes.
SPEED EDIT ERASE 8005959511
4.Press SELECT. The screen displays the name and number. The cursor
appears at the end of the name. Use 
, 
and the dial pad keys to edit the name. Press SELECT to confirm and move on to edit the number. Use 
to backspace and make corrections. Press SELECT to confirm and move to edit the distinctive ring setting.
5.Press SELECT to save the edited information.
Delete a Number/Name Stored in the Directory
1.Press 
(DIR). The screen displays DIRECTORY.
2.Press 
or 
to scroll alphabetically through entries stored in directory.
Press the dial pad key for the first letter of the entry you want to delete.
3.When the screen displays the entry you want to delete, press SELECT. Then press 
until ERASE flashes.
SPEED EDIT ERASE 8005959511
4.Press SELECT. The screen displays ERASE NO YES and the number. The current choice flashes.
5.Press 
until YES flashes.
6.Press SELECT. You’ll hear a confirmation beep.
19
Basic Operation
19 | 11/1/2005, 12:46 PM |