VTech CS6729-21, CS6729-5, CS6729-4D, CS6729-3 user manual Battery, Operation Operating time

Page 65

Appendix

Battery

It takes up to 11 hours for the battery to be fully charged. When it is fully charged, you can expect the following performance:

Operation

Operating time

While in handset use (talking*)

Up to 7 hours

 

 

While in speakerphone mode (talking*)

Up to 3.5 hours

 

 

While not in use (standby**)

Up to 5 days

 

 

*Operating times vary depending on your actual use and the age of the battery.

**Handset is not charging or in use.

The battery needs charging when:

A new battery is installed in the handset.

The handset beeps every 50 seconds while on a call.

The handset beeps and Low battery displays on the handset.

Put in charger displays on the handset.

A battery is properly installed and the screen is blank.

CAUTION:

To reduce the risk of fire or injury, read and follow these instructions:

Use only the batteries provided or equivalent. To order a replacement, visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377.

Do not dispose of the batteries in a fire. Check with local waste management codes for special disposal instructions.

Do not open or mutilate the batteries. Released electrolyte is corrosive and may cause burns or injury to the eyes or skin. The electrolyte may be toxic if swallowed.

Exercise care in handling batteries in order not to create a short circuit with conductive materials.

Charge the batteries provided with or identified for use with this product only in accordance with the instructions and limitations specified in this manual.

Observe proper polarity orientation between the battery and metallic contacts.

To prevent fire or shock hazard, do not expose this product to water or any type of moisture.

61

Image 65
Contents User’s manual Product news RegistrationTable of contents Answering system operation Answering system settingsAppendix IndexGetting started Parts checklistTelephone base and charger installation If you do not hear a dial tone Battery installationDisplays Put in charger Battery chargingTabletop to wall mount installation Installation optionsSee Telephone base and charger installation on Wall mount to tabletop installationTo use the voicemail Are you a new cable or VoIP subscriber?To use the built-in answering system PLAY/STOP REDIAL/PAUSE Handset layoutINT Using the menu Telephone settingsHandset ringer volume To enter the handset menuRinger tone Telephone base ringer volumeTo turn off the quiet mode Quiet modeTo set the duration and turn on the quiet mode Set date and time Press Select to choose LCD language LCD languageTo set your voicemail number Voicemail numberClear voicemail To manually turn off these indicatorsHome area code Key toneDial mode Telephone operation Mute VolumeCall waiting Temporary ringer silencingRedial Temporary tone dialingTo review and dial a redial entry To delete a redial entryTo access a number in the caller ID log To access a number in the directoryTo access a number on the redial list Check voicemailCalling HS X and then Transferred Transfer a callWeb address Find handsetTo start paging To end pagingTo share an outside call Multiple handset useJoin a call in progress Answer an incoming call during an intercom call IntercomINT needs 2 HS Calling HSCall transfer using intercom About the directory DirectoryPress Select to choose Add contact Add a directory entryEnter number To start an alphabetical search Review and dial from the directoryAlphabetical search Delete a directory entry Edit a directory entryAssign a speed dial entry Speed dialDial a speed dial number Reassign a speed dial entryClear SD #X? Delete a speed dial entryInformation about caller ID with call waiting Caller IDAbout caller ID Caller ID log Missed call indicatorReview and dial from the caller ID log Memory matchView dialing options Save a caller ID log entry to the directory Caller ID log screen messages Delete the caller ID log entriesTo delete an entry To delete all entriesAnswering system Answering system settingsAnnouncement Record your own announcementDelete your announcement Play the announcementTo turn on or off with a handset Answer on/offTo turn on or off with the telephone base Number of rings To turn this feature on or offCall screening Message alert tone Remote access codeRecording time Answering system and voicemail Using the answering system and voicemail togetherAnswering system operation New message indication Message capacityTo screen a call at the telephone base Call interceptTo screen a call at a handset Options while a message is being recordedTo play messages at the telephone base Message playbackTo play messages with a handset Options during playbackRecord, play or delete memos Delete all messagesTo delete all messages with the telephone base To delete all messages with a handsetWindow display Description Message window displaysCommand Description Remote accessExpand your telephone system AppendixAdd and register a handset To register a handsetTo deregister all handsets Replace a handsetScreen messages Appendix Handset lights Handset and telephone base indicatorsTelephone base lights Handset iconsOperation Operating time BatteryMy telephone does not work at all TroubleshootingThere is no dial tone Cannot dial outCharge light is off Low battery shows on the handset screenMy cordless handset isn’t performing normally Telephone does not ring when there is an incoming call Appendix Hear other calls when using the telephone Experience poor sound quality when using the speakerphoneMy caller ID features are not working properly Hear noise on the cordless handset and the keys do not workCannot retrieve voicemail messages Out of range or no pwr at base shows on the handset screenOutgoing announcement is not clear Answering system does not respond to remote commandsAnswering system does not record messages Messages on the answering system are very difficult to hearCommon cure for electronic equipment Important safety instructions Operating range Precautions for users of implanted cardiac pacemakersECO mode FCC Part FCC, Acta and IC regulationsIndustry Canada To activate the CEC battery charging testing mode Mesures de sécurité importantes For C-UL compliance onlyConservez CES Instructions Propos des téléphones sans fil MaintenanceRbrc seal About cordless telephonesWhat does this limited warranty cover? Limited warrantyHow do you get warranty service? Index Technical specificationsIndex Wall mount installation 5-6 Warranty Web address

CS6729-2, CS6729, CS6729-5, CS6729-4, CS6729-4D specifications

The VTech CS6729 series consists of several versatile cordless phone models, including the CS6729-3, CS6729-21, CS6729-4D, CS6729-4, and CS6729-5. These phones are designed to enhance communication while providing convenience and advanced features that cater to a variety of user needs.

One of the main features across all models in the CS6729 series is the robust DECT 6.0 technology, which offers superior clarity and range compared to older technology. DECT (Digital Enhanced Cordless Telecommunications) ensures that calls are secure and interference-free, allowing users to enjoy crystal-clear conversations without the common disruptions found in traditional analog systems.

Another notable characteristic of the VTech CS6729 series is the digital answering system with a voicemail feature. This allows users to receive and store incoming messages directly on their phone. The system is easy to navigate, allowing users to play, delete, or save messages with the push of a button. Additionally, the built-in speakerphone functionality enables hands-free calling, offering more flexibility and convenience during conversations.

The series also boasts a large, backlit display for easy readability, particularly in low-light conditions. This feature, combined with the easy-to-use menu navigation, makes the phones user-friendly for people of all ages.

Some models in the series come with the capability to connect to separate handsets, allowing for easy expansion of home or office communication systems. This scalability means that users can add additional handsets without the need for extra phone lines, facilitating seamless communication throughout larger spaces.

Another key feature is the caller ID and call waiting functionality, which helps users to screen calls effectively. Users can easily see who is calling before answering, thus enhancing their control over incoming communications.

The VTech CS6729 series is also energy efficient, designed with eco-friendly features that help reduce power consumption, leading to lower energy bills while being environmentally conscious.

In conclusion, the VTech CS6729 series of cordless phones—comprising models CS6729-3, CS6729-21, CS6729-4D, CS6729-4, and CS6729-5—offers a range of user-friendly features powered by advanced technologies. With their clear sound quality, modern design, and the ability to handle multiple calls, these phones provide effective communication solutions for home and office environments alike.