VTech QW2432 important safety instructions Charging Of Handset Battery Pack

Page 10

Getting Started

Charging Of Handset Battery Pack

The Handset of your QW2432 cordless telephone is powered by a rechargeable battery pack. It charges automatically whenever the Handset is in the Base Unit.

You should charge the battery pack for 12 hours when you first receive your phone. You'll know the battery pack needs charging when:

•The low battery message is displayed :

•The handset seems completely

dead, the LCD is completely clear and does not activate when you press the keys.

CAUTION: TO REDUCE THE RISK OF FIRE OR INJURY TO PERSONS BY BATTERY, READ AND FOLLOW THESE INSTRUCTIONS.

1.Use only the approprlate type and size battery pack specified in the instruction manual provided for this product.

2.Do not dispose of the battery pack in a fire. The cell may explode. Check with State and local codes for possible special disposal instructions.

3.Do not open or mutilate the battery pack. Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed.

4.Exercise care in handling battery in order not to short the battery with conducting materials such as rings, bracelets, and keys. The battery or conductor may overheat and cause burns.

5.Charge the battery pack provided with or identified for use with this product only in accordance with the instructions and limitations specified in the instruction manual.

6.Observe proper polarity orientation between the battery pack and battery charger.

10

Image 10

Contents Important Safety Instructions Important Safety Instructions Introduction Parts Check List Handset Layout Base Unit Layout Checking for dial tone SetupConnecting to phone line Tone/Pulse selectionInstallation of Battery Pack in Handset Getting StartedSpare Battery Charger/Power Backup Function GettingCharging Of Handset Battery Pack Wall Mounting Setup of the QW2422 Accessory Handset Registration and Operation of the QW2422 Accessory HandsetRegistration and Operation Enter Base ID Code Found BaseHandset Icons Handset and Base IndicatorsIcon Description Base Leds Handset LEDsLED Soft Menu Functions RDL RedialCalls Log Caller ID Caller ID Call Waiting IDHandset Settings Range EXTENDER, then press OK Range ExtenderRegister ExtenderMEM Memory To Store a Number/Name To Search For and Dial a Number Name To Delete a Number/NameTo Edit a Name or a Number Press the Edit softkey twice. Then choose Name or NUMSelect Base Ringer Melody Base SettingsSelect Base Ringer Volume and OFF Select Tone / PulseAnswering Calls Handset and Base OperationMaking Calls Redial from Base UnitHold Function Volume ControlMute Function Flash FunctionGlobal Call from Base Page/Intercom From Base to ALL HandsetsIntercom key Base Speakerphone Operation Low Battery IndicationHandsfree Speakerphone Operation Line in Use IndicationConference Calling Message Waiting IndicationTransferring Calls Advanced Operations Additional Base Features Network Service FeaturesAdditional Handset Features Belt Clip Headset OperationOperation To purchase a Headset, callMaintenance Phone Doesnt Work At All Handset Does Not Ring When You Receive a CallCase Of Difficulty No Dial ToneYou Hear Other Calls While Using Your Phone Common Cure For Electronic EquipmentWarranty Statement FCC Regulations FCC PartFCC Part Technical Specifications SizeBasic Operation Getting StartedAdvanced Operations Additional InformationIssue