VTech QW2432 You Hear Other Calls While Using Your Phone, Common Cure For Electronic Equipment

Page 35

In Case Of Difficulty

You Hear Other Calls While Using Your Phone

•Disconnect your Base Unit from the telephone jack, and plug in a regular telephone. If you still hear other calls, the problem is probably in your wiring or local service. Call your local telephone company.

You Hear Noise In The Handset, And None Of The Keys Or Buttons

Work

•Make sure the power cord is plugged in.

Common Cure For Electronic

Equipment

If the unit does not seem to be responding normally, then try putting the Handset in the cradle. If it does not seem to respond, do the following (in the order listed) :

1. Disconnect the power to the Base.

2. Disconnect the Handset battery,

then

and spare battery pack, if applicable.

3.Wait a few minutes.

4.Connect power to the Base.

5. Re-install the battery pack (s)

6. Watch for Handset to display :

Additional Information

Image 35

Contents Important Safety Instructions Important Safety Instructions Introduction Parts Check List Handset Layout Base Unit Layout Tone/Pulse selection SetupConnecting to phone line Checking for dial toneGetting Started Installation of Battery Pack in HandsetGetting Spare Battery Charger/Power Backup FunctionCharging Of Handset Battery Pack Wall Mounting Registration and Operation Registration and Operation of the QW2422 Accessory HandsetSetup of the QW2422 Accessory Handset Found Base Enter Base ID CodeIcon Description Handset and Base IndicatorsHandset Icons LED Handset LEDsBase Leds RDL Redial Soft Menu FunctionsCaller ID Call Waiting ID Calls Log Caller IDHandset Settings Extender Range ExtenderRegister Range EXTENDER, then press OKMEM Memory To Store a Number/Name To Delete a Number/Name To Search For and Dial a Number NamePress the Edit softkey twice. Then choose Name or NUM To Edit a Name or a NumberSelect Tone / Pulse Base SettingsSelect Base Ringer Volume and OFF Select Base Ringer MelodyRedial from Base Unit Handset and Base OperationMaking Calls Answering CallsFlash Function Volume ControlMute Function Hold FunctionIntercom key Page/Intercom From Base to ALL HandsetsGlobal Call from Base Line in Use Indication Low Battery IndicationHandsfree Speakerphone Operation Base Speakerphone OperationTransferring Calls Message Waiting IndicationConference Calling Advanced Operations Additional Handset Features Network Service FeaturesAdditional Base Features To purchase a Headset, call Headset Operation Operation Belt ClipMaintenance No Dial Tone Handset Does Not Ring When You Receive a CallCase Of Difficulty Phone Doesnt Work At AllCommon Cure For Electronic Equipment You Hear Other Calls While Using Your PhoneWarranty Statement FCC Part FCC RegulationsFCC Part Size Technical SpecificationsAdditional Information Getting StartedAdvanced Operations Basic OperationIssue