VTech QW2432 Register, Range EXTENDER, then press OK, Range Extender is on

Page 19

Range Extender

Your QW2432 has an enhanced feature that is designed to improve performance. If you are using your QW2432 in an area with excessive interference, or you require a moder- ate increase in operating range. the Range Extender feature can help to improve both the sound quality and range. Actual range will depend on your environment.

To select the Range Extender setting, follow the procedure listed below:

•In the idle(OFF) mode, press MENU and use the scroll keys to select

RANGE EXTENDER, then press OK.

• There are 3 option settings in the RANGE EXTENDER menu:

1. Select OFF to disable RANGE

EXTENDER

2.Select ON to enable RANGE EXTENDER. An "E" icon will appear in the upper left corner of Handset display, indicating that

RANGE EXTENDER is ON.

3. Select AUTO to allow your QW2432 to automatically

monitor the signal strength between the handset and base unit, and activate whenever necessary. With this option selected, your QW2432 may occassionally enable or disable the RANGE EXTENDER feature. When RANGE EXTENDER is enabled, an "E" icon will appear in the upper left corner of the Handset display.

•Use the scroll keys to select the desired setting, and then press OK to confirm the selection.

Note: When Range Extender mode is enabled, your QW2432 will consume more battery power. That means the standby and talk time of your Handset will be shorter.

Basic Operation

Register

Use this option to register a Handset to the QW2432 Base. You can register a total of four Handsets to the QW2432 Base. This process is activated automatically whenever a new handset is powered up in range of the QW2432 Base.

You will be prompted to enter the 15-digit Base ID code printed on the underside of the base unit. After entering this code, press OK. The Handset will display SEARCHING FOR BASE, and then FOUND BASE V14 when the process is complete.

Note : Base ID codes are 15 digits long and can include the following characters: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, *, or #.

18

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Important Safety Instructions Important Safety Instructions Introduction Parts Check List Handset Layout Base Unit Layout Tone/Pulse selection SetupConnecting to phone line Checking for dial toneGetting Started Installation of Battery Pack in HandsetGetting Spare Battery Charger/Power Backup FunctionCharging Of Handset Battery Pack Wall Mounting Setup of the QW2422 Accessory Handset Registration and Operation of the QW2422 Accessory HandsetRegistration and Operation Found Base Enter Base ID CodeHandset Icons Handset and Base IndicatorsIcon Description Base Leds Handset LEDsLED RDL Redial Soft Menu FunctionsCaller ID Call Waiting ID Calls Log Caller IDHandset Settings Extender Range ExtenderRegister Range EXTENDER, then press OKMEM Memory To Store a Number/Name To Delete a Number/Name To Search For and Dial a Number NamePress the Edit softkey twice. Then choose Name or NUM To Edit a Name or a NumberSelect Tone / Pulse Base SettingsSelect Base Ringer Volume and OFF Select Base Ringer MelodyRedial from Base Unit Handset and Base OperationMaking Calls Answering CallsFlash Function Volume ControlMute Function Hold FunctionGlobal Call from Base Page/Intercom From Base to ALL HandsetsIntercom key Line in Use Indication Low Battery IndicationHandsfree Speakerphone Operation Base Speakerphone OperationConference Calling Message Waiting IndicationTransferring Calls Advanced Operations Additional Base Features Network Service FeaturesAdditional Handset Features To purchase a Headset, call Headset OperationOperation Belt ClipMaintenance No Dial Tone Handset Does Not Ring When You Receive a CallCase Of Difficulty Phone Doesnt Work At AllCommon Cure For Electronic Equipment You Hear Other Calls While Using Your PhoneWarranty Statement FCC Part FCC RegulationsFCC Part Size Technical SpecificationsAdditional Information Getting StartedAdvanced Operations Basic OperationIssue
Top Page Image Contents