VTech QW2432 important safety instructions Wall Mounting

Page 11

	Wall Mounting	Started
	Wall Mounting
The Wall Mount bracket is designed for
use on standard Wall Mount plates only.		Getting
1	the wall mount bracket firmly in	Getting
1.	Line up the tabs on the wall
	mount adapter with the holes on
	the back of the base unit. Snap
2.	place.
2.	Plug the AC adapter into an
	electrical outlet, and the DC
	connector to the back of the base
	unit. If the handset battery pack
	has not been charged previously,
	place the handset in the base
	unit cradle, and allow it to charge
3.	for 12 hours.
3.	Connect the telephone line cord
	to the jack on the back of the
	base unit, and the other end to
4.	the wall jack.
4.	Mount the base unit on the wall.
	Position the base unit so the
	mounting studs will fit into the
	holes on the wall mount bracket.
	Slide base unit down on the
	mounting studs until it locks into
	place.

Image 11

Contents Important Safety Instructions Important Safety Instructions Introduction Parts Check List Handset Layout Base Unit Layout Tone/Pulse selection SetupConnecting to phone line Checking for dial tone Getting Started Installation of Battery Pack in HandsetGetting Spare Battery Charger/Power Backup FunctionCharging Of Handset Battery Pack Wall Mounting Registration and Operation Registration and Operation of the QW2422 Accessory HandsetSetup of the QW2422 Accessory Handset Found Base Enter Base ID CodeIcon Description Handset and Base IndicatorsHandset Icons LED Handset LEDsBase Leds RDL Redial Soft Menu FunctionsCaller ID Call Waiting ID Calls Log Caller IDHandset Settings Extender Range ExtenderRegister Range EXTENDER, then press OKMEM Memory To Store a Number/Name To Delete a Number/Name To Search For and Dial a Number NamePress the Edit softkey twice. Then choose Name or NUM To Edit a Name or a NumberSelect Tone / Pulse Base SettingsSelect Base Ringer Volume and OFF Select Base Ringer MelodyRedial from Base Unit Handset and Base OperationMaking Calls Answering CallsFlash Function Volume ControlMute Function Hold FunctionIntercom key Page/Intercom From Base to ALL HandsetsGlobal Call from Base Line in Use Indication Low Battery IndicationHandsfree Speakerphone Operation Base Speakerphone OperationTransferring Calls Message Waiting IndicationConference Calling Advanced Operations Additional Handset Features Network Service FeaturesAdditional Base Features To purchase a Headset, call Headset OperationOperation Belt ClipMaintenance No Dial Tone Handset Does Not Ring When You Receive a CallCase Of Difficulty Phone Doesnt Work At AllCommon Cure For Electronic Equipment You Hear Other Calls While Using Your PhoneWarranty Statement FCC Part FCC RegulationsFCC Part Size Technical SpecificationsAdditional Information Getting StartedAdvanced Operations Basic OperationIssue