VTech QW2432 important safety instructions Enter Base ID Code, Found Base

Page 13

			Registration and Operation	Started
			Registration and Operation
Enter Base ID Code				Getting
1.	After charging the	Handset,		Getting
1.	After charging the	Handset,
	remove it from its Charge Cradle,
	the screen will display:

2. Press NEW, then enter the 15 digit Base Unit ID code, located on the underside of the Base Unit.

3. Press OK. The Handset will display: PLEASE WAIT!!

4. Wait approximately 15 seconds.

The Handset will display:

FOUND BASE V14

If the Handset displays: BASE BUSY TRY LATER, this indicates that the system is in use. Wait until the Base Unit is in the idle (on hook) mode, and repeat step 2 to 4.

Congratulations! You can now enjoy the benefits of your multi-Handset system.

Image 13

Contents Important Safety Instructions Important Safety Instructions Introduction Parts Check List Handset Layout Base Unit Layout Connecting to phone line SetupChecking for dial tone Tone/Pulse selectionGetting Started Installation of Battery Pack in HandsetGetting Spare Battery Charger/Power Backup FunctionCharging Of Handset Battery Pack Wall Mounting Setup of the QW2422 Accessory Handset Registration and Operation of the QW2422 Accessory HandsetRegistration and Operation Found Base Enter Base ID CodeHandset Icons Handset and Base IndicatorsIcon Description Base Leds Handset LEDsLED RDL Redial Soft Menu FunctionsCaller ID Call Waiting ID Calls Log Caller IDHandset Settings Register Range ExtenderRange EXTENDER, then press OK ExtenderMEM Memory To Store a Number/Name To Delete a Number/Name To Search For and Dial a Number NamePress the Edit softkey twice. Then choose Name or NUM To Edit a Name or a NumberSelect Base Ringer Volume and OFF Base SettingsSelect Base Ringer Melody Select Tone / PulseMaking Calls Handset and Base OperationAnswering Calls Redial from Base UnitMute Function Volume ControlHold Function Flash FunctionGlobal Call from Base Page/Intercom From Base to ALL HandsetsIntercom key Handsfree Speakerphone Operation Low Battery IndicationBase Speakerphone Operation Line in Use IndicationConference Calling Message Waiting IndicationTransferring Calls Advanced Operations Additional Base Features Network Service FeaturesAdditional Handset Features Operation Headset OperationBelt Clip To purchase a Headset, callMaintenance Case Of Difficulty Handset Does Not Ring When You Receive a CallPhone Doesnt Work At All No Dial ToneCommon Cure For Electronic Equipment You Hear Other Calls While Using Your PhoneWarranty Statement FCC Part FCC RegulationsFCC Part Size Technical SpecificationsAdvanced Operations Getting StartedBasic Operation Additional InformationIssue