VTech QW2432 important safety instructions Technical Specifications, Size

Page 39

Technical Specifications

FREQUENCY CONTROL	WEIGHT
Crystal controlled	Handset :	170	grams
PLL synthesizer	Base :	348	grams

TRANSMIT FREQUENCY

2401.056 - 2482.272 MHz

RECEIVE FREQUENCY

2401.056 - 2482.272 MHz

CHANNELS

95 Channels

NOMINAL EFFECTIVE RANGE

Maximum power allowed by FCC. Actual operating range may vary according to environmental conditions at the time of use.

SIZE

Handset :48mm x 33mm x 175mm

Base : 170mm x 115mm x 60mm

POWER REQUIREMENTS

Handset : 800mAh NiCd Battery

Pack or 1500mAh NiMH

Battery Pack

Base : 7 VDC @ 900mA

MEMORY

Speed Dial: 50 Memory locations, into 32 digits per location.

CID : Alpha Numeric Display 50 Memory locations

SPECIFICATIONS ARE TYPICAL AND MAY CHANGE WITHOUT NOTICE.

38

39

Additional Information

Image 39

Contents Important Safety Instructions Important Safety Instructions Introduction Parts Check List Handset Layout Base Unit Layout Tone/Pulse selection SetupConnecting to phone line Checking for dial toneGetting Started Installation of Battery Pack in HandsetGetting Spare Battery Charger/Power Backup FunctionCharging Of Handset Battery Pack Wall Mounting Registration and Operation of the QW2422 Accessory Handset Setup of the QW2422 Accessory HandsetRegistration and Operation Found Base Enter Base ID CodeHandset and Base Indicators Handset IconsIcon Description Handset LEDs Base LedsLED RDL Redial Soft Menu FunctionsCaller ID Call Waiting ID Calls Log Caller IDHandset Settings Extender Range ExtenderRegister Range EXTENDER, then press OKMEM Memory To Store a Number/Name To Delete a Number/Name To Search For and Dial a Number NamePress the Edit softkey twice. Then choose Name or NUM To Edit a Name or a NumberSelect Tone / Pulse Base SettingsSelect Base Ringer Volume and OFF Select Base Ringer MelodyRedial from Base Unit Handset and Base OperationMaking Calls Answering CallsFlash Function Volume ControlMute Function Hold FunctionPage/Intercom From Base to ALL Handsets Global Call from BaseIntercom key Line in Use Indication Low Battery IndicationHandsfree Speakerphone Operation Base Speakerphone OperationMessage Waiting Indication Conference CallingTransferring Calls Advanced Operations Network Service Features Additional Base FeaturesAdditional Handset Features To purchase a Headset, call Headset OperationOperation Belt ClipMaintenance No Dial Tone Handset Does Not Ring When You Receive a CallCase Of Difficulty Phone Doesnt Work At AllCommon Cure For Electronic Equipment You Hear Other Calls While Using Your PhoneWarranty Statement FCC Part FCC RegulationsFCC Part Size Technical SpecificationsAdditional Information Getting StartedAdvanced Operations Basic OperationIssue