VTech QW2432 important safety instructions Spare Battery Charger/Power Backup Function, Getting

Page 9

Spare Battery Charger/Power Backup Function	Started
Spare Battery Charger/Power Backup Function
The QW2432 can use a the spare battery in the Base Unit to provide operational
backup in the event of a power failure. With a fully charged battery pack in the	Getting
The spare battery pack can also be used to replace a drained handset battery,	Getting
spare battery charger, you will still be able to place and receive calls from the
Handset for up to 5 hours.
ensuring uninterrupted use.

A spare battery can be purchased from most retail stores that carry electronic equipment.

NOTE :

When using the QW2432 during Power Backup mode, audio quality may be compromised due to reduced Power availability.

1.	Open the spare battery charger
	by pressing the release button,
	located on the right-hand side of
	the Base Unit. A drawer will open
	to reveal the spare battery
	compartment.
2.	Place a battery pack in the
1	drawer with the charge contacts
	drawer with the charge contacts
	facing up and to the left.
3.	Push the drawer closed.

The spare battery takes 24 hours to fully charge a drained battery.

INSTALL	CAUTION:TO	3
BATTERY
THIS	REDUCE RISK OF FIRE,
SIDE UP	USE ONLY VTECH
	80-5017-00-00

QW2432

2

8

9

Image 9

Contents Important Safety Instructions Important Safety Instructions Introduction Parts Check List Handset Layout Base Unit Layout Connecting to phone line SetupChecking for dial tone Tone/Pulse selectionGetting Started Installation of Battery Pack in HandsetGetting Spare Battery Charger/Power Backup FunctionCharging Of Handset Battery Pack Wall Mounting Registration and Operation of the QW2422 Accessory Handset Setup of the QW2422 Accessory HandsetRegistration and Operation Found Base Enter Base ID CodeHandset and Base Indicators Handset IconsIcon Description Handset LEDs Base LedsLED RDL Redial Soft Menu FunctionsCaller ID Call Waiting ID Calls Log Caller IDHandset Settings Register Range ExtenderRange EXTENDER, then press OK ExtenderMEM Memory To Store a Number/Name To Delete a Number/Name To Search For and Dial a Number NamePress the Edit softkey twice. Then choose Name or NUM To Edit a Name or a NumberSelect Base Ringer Volume and OFF Base SettingsSelect Base Ringer Melody Select Tone / PulseMaking Calls Handset and Base OperationAnswering Calls Redial from Base UnitMute Function Volume ControlHold Function Flash FunctionPage/Intercom From Base to ALL Handsets Global Call from BaseIntercom key Handsfree Speakerphone Operation Low Battery IndicationBase Speakerphone Operation Line in Use IndicationMessage Waiting Indication Conference CallingTransferring Calls Advanced Operations Network Service Features Additional Base FeaturesAdditional Handset Features Operation Headset OperationBelt Clip To purchase a Headset, callMaintenance Case Of Difficulty Handset Does Not Ring When You Receive a CallPhone Doesnt Work At All No Dial ToneCommon Cure For Electronic Equipment You Hear Other Calls While Using Your PhoneWarranty Statement FCC Part FCC RegulationsFCC Part Size Technical SpecificationsAdvanced Operations Getting StartedBasic Operation Additional InformationIssue