VTech QW2432 Setup, Connecting to phone line, Checking for dial tone, Tone/Pulse selection

Page 7

Setup	Started
Setup
Plug the AC power adapter into an electrical outlet, and the DC connector into
the back of the base unit.	Getting
To AC outlet	Getting

To telephone socket outlet

AC adapter	To telephone
	jack

Connecting to phone line

Plug one end of the telephone line cord into the jack on the back of the base unit. Plug the other end of this cord into the wall jack.

Checking for dial tone

After the battery is charged press ON on the Handset. The Phone icon

will appear on the handset display, and you will hear dial tone. If not, see In Case of Difficulty.

Tone/Pulse selection

See BASE SETTINGS for details.

CAUTION: Use only the Qwest power supply provided with your Qwest

Unit.

IMPORTANT:

For best performance the QW2432

Should be installed as follows:

In an elevated location, in the center of the room, with no obstructions nearby.

In a location that is away from other electrical appliances such as microwave ovens, personal computers, or

televisions.

Image 7

Contents Important Safety Instructions Important Safety Instructions Introduction Parts Check List Handset Layout Base Unit Layout Tone/Pulse selection SetupConnecting to phone line Checking for dial toneGetting Started Installation of Battery Pack in HandsetGetting Spare Battery Charger/Power Backup FunctionCharging Of Handset Battery Pack Wall Mounting Setup of the QW2422 Accessory Handset Registration and Operation of the QW2422 Accessory HandsetRegistration and Operation Found Base Enter Base ID CodeHandset Icons Handset and Base IndicatorsIcon Description Base Leds Handset LEDsLED RDL Redial Soft Menu FunctionsCaller ID Call Waiting ID Calls Log Caller IDHandset Settings Extender Range ExtenderRegister Range EXTENDER, then press OKMEM Memory To Store a Number/Name To Delete a Number/Name To Search For and Dial a Number NamePress the Edit softkey twice. Then choose Name or NUM To Edit a Name or a NumberSelect Tone / Pulse Base SettingsSelect Base Ringer Volume and OFF Select Base Ringer MelodyRedial from Base Unit Handset and Base OperationMaking Calls Answering CallsFlash Function Volume ControlMute Function Hold FunctionGlobal Call from Base Page/Intercom From Base to ALL HandsetsIntercom key Line in Use Indication Low Battery IndicationHandsfree Speakerphone Operation Base Speakerphone OperationConference Calling Message Waiting IndicationTransferring Calls Advanced Operations Additional Base Features Network Service FeaturesAdditional Handset Features To purchase a Headset, call Headset OperationOperation Belt ClipMaintenance No Dial Tone Handset Does Not Ring When You Receive a CallCase Of Difficulty Phone Doesnt Work At AllCommon Cure For Electronic Equipment You Hear Other Calls While Using Your PhoneWarranty Statement FCC Part FCC RegulationsFCC Part Size Technical SpecificationsAdditional Information Getting StartedAdvanced Operations Basic OperationIssue